Assembly Instruction

ManualsBrandsPottery Barn ManualsHome OfficePottery Barn Emery Bookcase

pottery barn kids

EMERY 2 SHELF BOOKSHELF

PRE-ASSEMBLY:

• Please read all instruction before beginning assembly. The illustrations provided allow for easier

assembly when used in conjunction with the assembly instructions.

• Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as this

will avoid damaging any parts during assembly. The shipping box provides and ideal work surface. Do

not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or

hardware.

• For your safety and ease, adult assembly by two people is recommended.

• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or

hardware.

• Use the parts and hardware lists to identify and separate each of the pieces included prior to starting

assembly.

• Note: DO not fully tighten all bolts until all parts are in place. Failure to follow these instructions may

cause the bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage hardware of split

wood.

PARTS INCLUDED:

(A) Top panel – 1pc

(B) Right side panel – 1pc

(D) Shelf – 1pc

(E) Bottom panel – 1pc

(F) Back panel – 1pc

TOOLS REQUIRED:

Phillips head screwdriver (not included)

HARDWARE:

(G) Allen bolt 1/4”x28x15mm – 12pcs

(H) Allen Key – 1pc

(I) Phillips head screws 8x32mm – 2pcs

(J) Phillips head screws 7 x 20mm – 6pcs

Summary of content (4 pages)

PAGE 1
pottery barn kids EMERY 2 SHELF BOOKSHELF PRE-ASSEMBLY: • Please read all instruction before beginning assembly. The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions. • Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as this will avoid damaging any parts during assembly. The shipping box provides and ideal work surface.
PAGE 2
(K) Bracket 48x21x10mm – 2pcs (L) Long screw 6x32mm – 2pcs (M) Short screw 6x19mm – 2pcs (N) Nylon strap 300x12x8mm – 1pc ASSEMBLY INSTRUCTIONS: 1. Lay the Shelf (D) and Bottom panel (E) down as shown in the illustration below. 2. Attach the Right side panel (B), Left side panel (C) to Shelf (D) and Bottom panel (E) using Allen bolts (G) and Allen key (H). 3. Fix the Bottom panel (E) to Side panel using Phillips head screws 8x32mm (I) as shown. 4.
PAGE 3
5. Insert and fasten the Phillips head screws 7 x 20mm (J) to Back panel (F) as shown. CARE INSTRUCTIONS: • Dust often using a clean, soft, dry lint-free cloth. • Blot spills immediately, and wipe with a clean, damp, cloth. • We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish. Thank you for your purchase stores | catalog | www.potterybarnkids.com USA 1.800.290.
PAGE 4
FURNITURE TIPPING RESTRAINT Young children may be injured by tipping furniture. The use of a tipping restraint is highly recommended. When properly installed, this restraint could provide protection against the unexpected tipping of furniture due to small tremors, bumping or climbing. We recommend mounting this restraint to a wall stud. WARNING: This product is only a deterrent. It is not a substitute for proper adult supervision.