Assembly Instruction

Page 1/3

pottery barn kids

JANIE BOOKCASE

PRE-ASSEMBLY:

• Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in

conjunction with the assembly instructions.

• For your safety and ease, assembly by two adults is recommended.

• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface. Use care

as some parts or hardware may have sharp points or edges.

• Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or hardware.

• Use the parts and hardware lists to identify and separate each of the pieces included.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause the bolts

to misalign during assembly.

• The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.

PARTS INCLUDED:

A. Shelf (3)

B. Spindle Pole (8)

C. Feet (4)

D. Finials (4)

ASSEMBLY INSTRUCTIONS:

1. Insert the (4) Legs into pre-drilled holes on underside of one Shelf (A) (Figure 1)

(fig.1)

PAGE 1
pottery barn kids JANIE BOOKCASE PRE-ASSEMBLY: • Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions. • For your safety and ease, assembly by two adults is recommended. • Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface. Use care as some parts or hardware may have sharp points or edges.
PAGE 2
. Insert (4) Spindle Poles (B) into the protruding bolts, as shown, and twist Spindle Poles (B) clockwise until fully tightened, (Fig.2). B (fig.2) 3. Align and insert one Shelf (A) onto the protruding bolts on the Spindle Poles (B), (Figure 3). A (fig.3) 4. Repeat Step 2 to attach the (4) remaining Spindle Poles (B), (Figure 4). B (fig.
PAGE 3
5. Align and insert one Shelf (A) onto the protruding bolts on the Spindle Poles (B), (Figure 5). A (fig.5) 6. Attach the 4 Finials (D) into the protruding bolts and turn clockwise to tighten, (Figure 6). D (fig.6) CARE INSTRUCTIONS: • Dust often using a clean, soft, dry lint-free cloth. • Blot spills immediately, and wipe with a clean, damp, cloth. • We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.