Assembly Instruction
Page 1/3
pottery barn kids
MADELINE 2 SHELF BOOKCASE
PRE-ASSEMBLY:
• Read all instructions before beginning assembly. The illustrations provided allow for easier assembly
when used in conjunction with the assembly instructions.
• For your safety and ease, assembly by two adults is recommended.
• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work
surface. Use care as some parts or hardware may have sharp points or edges.
• Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.
• Use the parts and hardware lists to identify and separate each of the pieces included.
• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may
cause the bolts to misalign during assembly.
• The use of power tools for assembly is not recommended. Power tools can damage hardware or split
wood.
PARTS INCLUDED:
A – Top panel (x1)
B – Right side panel (x1)
C – Left side panel (x1)
D – Shelf (x1)
E – Bottom Panel (x1)
F – Back panel (x1)
TOOLS REQUIRED:
Phillips head screwdriver (not included)
G - Allen Key (included)
HARDWARE ENCLOSED:
H –Allen Bolts 1/4”x1-1/8” x15mm (x8) I –Phillips head screws 8x32mm (x8)
J – Phillips head screws 8x25mm (x6) K – Phillips head screws 6x19mm (x24)