Manual

"DUALBAIL" DRIVE CONTROL
. To start forward motion, lift drive control
bar up to handle°
° To stop forward motion, release drive
control bar_
Operator
presence
control bar
DRIVE CONTROL ENGAGED
"AUTOWALK" DRIVE CONTROL
o Self-propelling is controlled by holding
the operator presence control bar down
to the handle and pulling the ddve con-
trollever(s) rearward to the handle. The
farther toward the handle the lever(s)
are pulled, the faster the unit will travel.
. Forward motion will stop when either
the operator presence control bar or a
drive control lever are released° To stop
forward motion without stopping engine,
release the drive control lever(s) only.
Hold operator presence control bar
down against handle to continue mowing
withoutself-propelling,
NOTE: If after releasing thedrive control the
mowerwili not rollbackwards, push the mower
forward slightly to disengage drive wheels,,
DRIVE CONTROL DISENGAGED
control presence
lever(s) control ba_
TO ENGAGE DRIVE CONTROL
turnbuckle
DRIVE CONTROL DISENGAGED
FRONT WHEEL DRIVE MODELS ONLY:
- To keep drive control engaged when
turning corners, push down on the
handle to lift the front wheels off the
ground while turning lawn mower,
18