Manual

ASSEMBLE GRASS CATCHER
(REAR DISCHARGE MOWERS ONLY)
IMPORTANT: If your model lawn mower
is mulcher ready, the mulcher plate or plug
must be removed before using mower as
a bagger. To convert mower to bagging or
discharging, see the Operation section in
this manual.
Look at the different grass catcher illustra-
tions that follow. Determine which type
of grass catcher you have and follow the
appropriate instructions.
"FABRIC TOP" GRASS CATCHERS
TO ASSEMBLE AND ATTACH GRASS
CATCHER
• Put grass catcher frame into grass bag
with rigid part of bag on the bottom.
• Slip vinyl bindings over frame.
NOTE: If vinyl bindings are too stiff, hold
them in warm water for a few minutes. If
bag gets wet, let it dry before using.
• Lift the rear door on the mower housing.
• For HINGE BRACKET mounted catcher,
place the grass catcher frame onto the
formed tabs on the rear door hinge
bracket.
• For HANDLE BRACKET mounted
catcher, place frame side hooks into
slots in handle brackets.
• For DOOR PIVOT PIN mounted catcher,
place the grass catcher frame hooks
onto the door pivot pins.
• For DOOR SLOT mounted catcher,
place the grass catcher frame hooks into
the slots of the rear door.
NOTE: The grass catcher is secured to the
lawn mower housing when the rear door is
lowered onto the grass catcher frame.
HINGE BRACKET MOUNTED
- Rear door
, Hinge bracket
G rass
catcher
frame
Formed tabs
HANDLE BRACKET MOUNTED
Handle Rear Grass
oor catcher
handle
Catcher frame side hook
DOOR PIVOT PIN MOUNTED
Pivot " Rear Grass
catcher
_- handle
Catcher frame
\
Rigid
' bottom
Catcher frame hook
DOOR SLOT MOUNTED
Rear door slots
Grass
catcher
handle
Catcher frame hook
6