FMPort User's Guide Portable full channel FM transmitter with Charger for iPhone and iPod www.macally.
Thank you for purchasing the Macally FMPort . Macally FMPort is a portable full channel FM transmitter with charger for iPhone and iPod. The FMPort supports all models iPhone 2G/3G/3GS, iPod touch 1st/2nd/3rd Gen, iPod classic, iPod nano 1st/2nd/3rd/4th/5th Gen, iPod 5th Gen, iPod 4th Gen and iPod mini. Before you begin using the Macally FMPort, be sure to read this user’s guide in its entirety. Macally Technical Support: Please register this product at www.macally.com/register.html.
FMPort Basics 1 2 3 4 5 6 7 30 Pin Connector (Connect to iPod or iPhone) Built-in QS button - Quick switch among 4 memory channels (Four initial frequency channels are 88.1, 94.1, 100.1 & 106.1MHz, which are changeable to suit your need.
Remote Control Remote control provides you more control to FMPort and iPod/iPhone conveniently.
Using the FMPort 1.Connect the FMPort to your iPod or iPhone. Play music in iPod or iPhone, the FMPort LCD display will turn on. iPod or iPhone provides power to the FMPort, so they are portable to use in car or home where radio is located. 2. You can also charge iPod or iPhone while using the FMPort. At home, please use included USB mini-B cable to connect FMPort to a USB AC charger(not included) or a computer’s USB port(please exit from sync function but remain USB cable connection) to get power.
3. The FMPort LCD display shows a frequency channels (For example, 88.1MHz). 4. Turn on your radio, tune to FM channel. We suggest you looking for a station between 88.1 and 107.9MHz that is not currently used or with very weak signal for broadcast in your area. 5. Once you have set a channel in radio, press "+" or "-" buttons to match the frequency channel to FM radio. (For example, if the radio frequency channel is set to 95.1MHz then the FMPort Transmitter should also be set to 95.1MHz).
Updating the Memory Channels: FMPort comes with four default memory channels M1 to M4, 88.1, 94.1, 100.1 and 106.1MHz. The memory channel can be updated to your own clear FM channels, so you can quick switch among clear memory channels by pressing QS button. 1. Find a clear frequency channel to play iPod music. 2. Press and hold QS button for 1.
turn on display, however control of the FMPort and FM transmitter do not work until iPod or iPhone music starts playing. Warranty Macally peripherals warrants that this product will be free from defects in title, materials and manufacturing workmanship for one year from the date of purchase. If the product is found to be defective then, as your sole remedy and as the manufacturer’s only obligation, Macally will repair or replace the product.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules.
