User's Manual

Fig. 14 shows Save and Load commands under the File in pop down menu.

Fig. 14

“Save” command lets you save any changes or updates taken place in Login2Go. “Load” command

allows you to scan another RFID tag to load its configuration file without exiting and opening

Login2Go application again. When “Load” is executed, Login2Go will prompt you to put another

RFID tag near the eNetPad.

When users exit Login2Go application, by either clicking “Exit” command or closing the main appli-

cation window, a dialog window will pop up to confirm whether to save the change if there is any

change associated with the current RFID tag.

Fig. 15 shows Reformat command under Tools menu.

Fig. 15

“Reformat” command will reformat the given RFID tag, delete the corresponding TagId.pas file, and

exit Login2Go application. This command is used if there is corrupted data in the given RFID tag

and/or the corresponding TagId.pas file. The RFCyberOne Service must be up running while invok-

ing the reformat operation, i.e., the RFCyberOne Console icon “R” in task bar needs to be green

color.