User's Manual

ManualsBrandsPower 7 Technology ManualsElectronicsRFID Reader

Favorite tab

To launch the newly added web site “Yahoo Mail”, you first select the web site “Yahoo Mail” as

shown in Fig. 16, then click “Launch” button.

Fig. 16

Login2Go will first launch an IE for “Yahoo Mail” and automatically log into the account with login

name and password obtained from the previous learning process.

Tips for effective learning

In order to improve efficiency and compatibility of automatic web site login and avoid errors in learn-

ing process, it is recommended to apply following techniques in configuration and learning of your

favorite web sites:

(1) Users should train Login2Go with the shortest login sequence, if possible, by using copy-and-

paste technique described before. It has benefits, such as:

• To reduce the steps being recorded so that more portable sites can be stored on a RFID tag.

• To shorten time for Login2Go to logon into a web site.

• To improve the web site compatibility.

(2) While conducting a learning process for a web site, users are recommended not to perform any

action on the embedded IE or pop-up windows that are not related to the logon process.

(3) Users are recommended not to click to close any pop up window during the learning process. If

any pop up window prevents users from performing the logon steps, users should simply drag and

move away the pop up window so that the learning process can be continued.

(4) When user performs an action that leads to a new page being loaded into the embedded IE

learning window, users should wait for that page to be fully loaded before proceeding next step.

Failure to do so may result in an incomplete record of login sequence.

(5) Before starting login learning process of a web site, user must log off from the web site if user

already logon into the web site in standard IE browser.

(6) In case a web site, such as Yahoo Mail, Hotmail and Gmail etc., is unexpectedly logged in during

learning process, users should log off from the web site, close embedded IE learning window, then

exit current Login2Go, invoke a new Login2Go application to continue the learning process.

Summary of content (15 pages)

PAGE 1
Favorite tab To launch the newly added web site “Yahoo Mail”, you first select the web site “Yahoo Mail” as shown in Fig. 16, then click “Launch” button. Fig. 16 Login2Go will first launch an IE for “Yahoo Mail” and automatically log into the account with login name and password obtained from the previous learning process.
PAGE 2
Known Issues Not every web site will be supported by Login2Go due to web design techniques and compatibility issue. Web sites that use one of the following techniques will most likely have problem with Login2Go: (1) JavaApplet (2) Flash (3) For web sites using combo-box to change pages, such as http://www.citibank.com, it is recommended to start at login page URL, not from the home page URL of the web site.
PAGE 3
Using LoginEZ LoginEZ Setup Before using LoginEZ, you must set up your username, password, and domain name or local machine name to the eNetCard. 1. Go to Start menu, All Programs, RFCyber, and LoginEZ, and then click on LoginEZ Setup Tool. Fig. 17 2. After click on LoginEZ Setup Tool, the setup window will pop up. Enter your username and password. If you have set up and connected to the local network, type in your domain name. Otherwise, type in your local machine name.
PAGE 4
3. Click on Initialize/Update button. You will need to scan your eNetCard by the eNetPad when Window prompts you. Fig. 19 4. When it is finished, a message will appear in the Status window. Fig. 20 5. Un-Initialize will erase the data for loginEZ stored in the eNetCard. 6. Show Data will display Windows Login info, i.e. username, password, and domain name or local machine name of the LoginEZ in the status window from the eNetCard. 7. Clean Status will clear the data displayed in the status window. 8.
PAGE 5
LoginEZ Activation Now you need to activate LoginEZ by following these procedures before using it. 1. Go to Start menu, All Programs, RFCyber, and LoginEZ, and then click Activate RFCyber LoginEZ. Fig. 21 2. Click Continue to go to next step. Fig.
PAGE 6
3. Click OK and it will restart your computer. Fig. 23 4. After restart, you will be able to use eNetCard to login to the computer. 5. A new LoginEZ window appears replacing of the regular Windows Login screen. Fig. 24 6. Make sure the blue LED of the eNetPad is on, and wait for LoginEZ to finish loading and ask you to scan eNetCard. Put your eNetCard on top of eNetPad for one second.
PAGE 7
Set Back to Microsoft Login When you decide to restore to normal windows login screen, please follow these steps 1) Go to Start Menu, All Programs, RFCyber, and Login EZ, then click on Set Back to Microsoft Login Fig.
PAGE 8
If LoginEZ window does not appear in Windows login screen after computer restart, you can follow these steps to correct the problem. 1. Press Ctrl, Alt, and Del keys at the same time to bring up regular login window, and type in your user name and password to login to Windows. 2. Go to Start menu, and then click Control Panel. Fig. 27 3. Find Administrative Tools and double click on it. Fig. 28 4. You will see several icons in the Administrative Tools. Double click the Local Security Policy. Fig.
PAGE 9
5. In the Local Security settings, click Local Policies and Security Option on left side of the window. On right side of the Windows, scroll to find Interactive logon: Do Not Require Ctrl + Alt + Del. Right click on it, select on the option Properties. Fig. 30 6. Click Disabled option, and click OK button. Fig. 31 7. Restart the computer and confirm LoginEZ window appears as new login screen.
PAGE 10
eNetCard Management Tool eNetCard Management Tool allows one to reformat (or erase) Login2Go and LoginEZ data saved for the eNetCard, or to restore factory default setting to the eNetCard 1. To launch eNetCard Management Tool, go to Start Menu, All Programs, RFCyber, and click eNetCard Management Tool 2) eNetCard Tool is displayed Fig. 32 Fig.
PAGE 11
3) Analyze button can reveal eNetCard Tag ID, and how much memory has been used Fig. 34 4) Reformat Login2Go button will erase setting and website Login data associated with the eNetCard. Fig.
PAGE 12
5) Reformat LoginEZ button erases Windows Login data associated with the eNetCard Fig. 36 6) Reset to manufacture default button restores factory default setting to the eNetCard Fig.
PAGE 13
RFID Enabled Application Development Login2Go and LoginEZ are just examples of RFID-enabled applications, developed on RFCyberWorkTM platform, a patent pending RFID based electronic payment technology by RFCyber Corp. As RFID reader/writer, Macally eNetPad serves as an essential hardware tool within RFCyberWork framework. RFCyberWork provides end-to-end security and NxN client server architecture for RFID applications developed and deployed on RFCyberWork.
PAGE 14
FAQs (Frequently Asked Questions) (continue) 5. What should I do if there is an error message after I click “Save” command? Login2Go will try its best to save your data at exit, however, in rare cases, data may not be saved correctly. Please report to our tech support. 6.
PAGE 15
t d e e P d e e de deN deN Pade Pade tPad Pad adeN Pad Pade etPa NetP eNe deN Net etPa etPa etPa deN a t t a e t a t d t e N N P etP etP eNe eNe eNe eNe Net eNe eNe deN Pad etPa NetP tPad ade ade adeN etPa etP d e d N eN d e e eN d et tP N tP Pa ad ad tP ad etPa etPa etP etP tPad etPa etPa Net deN ade tPad deN eNe eNe eNe Pade Pad deN e e t N a N N e d N a N a d N tP d et de ade Pade Pade deN Pade ade tPad etP eNe deN NetP etPa etPa etPa eNe deN etP etPa e t a e tP tP et eN d eN N N N Pa ad a N et Ne deN eN