PMD-121CMX 12.
Contents Caution 4 Features and Controls Monitor/DVD Player Remote Control 6 6 8 Power and Mode Selection Releasing The Monitor Turning on The Monitor Mute Function 10 10 10 10 AV mode 11 Picture Control Contrast/Brightness/Color/FM 12 12 13 13 14 14 14 14 15 15 16 16 18 18 21 21 21 21 21 22 22 22 23 23 23 24 24 24 DVD Setup Setup Menu General Setup TV Aspect Ratio Angle Viewing OSD Language Screen Saver Audio Setup Dolby Digital Setup Equalizer Settings Video Setup Quality Preferences Setup TV Ty
SPECIFICATIONS Caution Please read and observe all warnings and instructions in this manual and those marked on the unit. Retain this booklet for future reference. There are two kinds of alarm symbols as follows: The lightning bolt with arrowhead inside in an equilateral triangle is intended to alert the user to the presence of , dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to WARNING people.
Caution Troubleshooting CAUTION Symptom Items to Check Actions to be Taken Buttons do not work. Is the power turned on? Check the car battery capacity. No sound Is the audio which is connected with the audio cable set to receive the DVD signal output? Is audio cable connected securely? Is the monitor which is connected with the audio cable turned on? Is the audio output set in the correct position? Select the correct input mode for the audio receiver.
Features and Controls Disc Information Monitor/DVD Player DVD features DVD discs provide high-resolution images with high-quality sound. This DVD player can play not only DVD discs of various versions, but also S-VCD, VCD, audio CD and MP3 discs. Vo Discs that cannot be played l+ MO Vo NI TO R l- DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. In addition, a CD or a CD-RW which was recorded on special software cannot be played.
Installation Features and Controls POWER Button PLAY/PAUSE Button MENU Button 1. Open the package and check that these items are presents. M PLAY UNIT INSTALLATION PLATE SCREW A AV MENU POW ER SCREW B FAST Forward/Reverse Button 2. Connect the external compoments to the RCA cable or AV output. (Refer to the connection diagram on page 33) Dome Light Button Dome Light Button AV Select Button +/- Buttons 3. Match the position of installation bracket and installation plate with screw A.
Connection Diagram Features and Controls Remote Control 1 2 POWER Turns the DVD Player/Monitor on or off. MUTE Press this button to switch off the audio during playback. Press again to restore the audio. Red AUDIO(R) GAME White AUDIO(L) MONITOR 3 (not function in this unit) To start playback of iPOD, press this button. Press again to pause the playback. If playback is paused, press this button to resume playback.
SD/USB Functions Features And and Controls Controls 1. When USB or SD is inputed, the monitor will be displayed as shown below. But when you input USB that the function can not change into SD S state (only the SD is moving). And you can select the desired menu by pressing the MODE button on the remote control of monitor. 2. Use the (arrow and ENTER) buttons to select and set desired settings. 00:00 00:00 kbps 000/003 \ .. ..
Power and Mode Selection DVD Functions PBC Releasing The Monitor [DVD]/[AUDIO]/[MP3] Push the release button (located on the front edge of the screen housing) and l o w e r t h e m o n i t o r. Yo u c a n a l s o a d j u s t t h e s w i v e l a n g l e . This button does not function in PBC mode. [VCD] You can turn the PBC (Play Back Control) function on or off by pressing this button. When PBC is loaded, the PBC function is enabled automatically. This function is similar to selection of DVD title.
Power and Mode Selection DVD Functions Selecting an AV mode Repeat 1. Turn the power ON on the unit and on the external devices. [DVD] [AUDIO] Pressing REPEAT button changes the play mode as follows: Pressing REPEAT button changes the play mode as follows: OSD Chapter Title All CONDITION OSD CONDITION Repeat chapter Track Repeat single Repeat title All All 2. Select the DVD, AV1 or AV2 mode by pressing the AV Select button on the unit or on the remote control. 3. Play the external device.
Picture Control DVD Functions Contrast/Brightness/Color/FM Prev( To adjust CONTRAST, BRIGHTNESS, COLOR or FM press the MENU button until you arrive at the screen for that item. Use the arrow buttons to adjust the value. Press the MENU button to make another adjustment or leave the MENU system. [DVD]/[VCD] 1. Bring up the on-screen function menu by pressing the MENU button on the unit or the remote control. 2.
DVD Setup DVD Functions Fast Reverse Searching( ) Setup Menu-Main Page [DVD] [AUDIO] Pressing FR button repeatedly changes the play mode as follow: Pressing FR button repeatedly changes the play mode as follow: OSD CONDITION FR 2X 2X rewind search FR 4X 4X rewind search FR 8X 8X rewind search FR 16X 16X rewind search FR 32X 32X rewind search PLAY Play OSD CONDITION FR 2X 2X rewind search FR 4X 4X rewind search FR 8X 8X rewind search FR 16X 16X rewind search FR 32X 32X rewind
DVD Setup DVD Functions General Setup Subtitle(SUB-T) 1. TV Aspect Ratio In the Setup function called TV Display, you set the player to output the video signal at the same aspect ratio as your monitor. If the monitor is widescreen format, select WIDE. If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B (Letterbox). Normal / PS 4:3 PAN SCAN Choose this setting if you want the movie to fill the entire screen.
DVD Setup DVD Functions Display 4.
DVD Functions DVD Setup Stop( Show below are two examples of Audio Setups. ) [DVD]/[AUDIO] In DVD mode, Press STOP to stop playback. To resume playback, press PLAY/PAUSE. If you press STOP and then PLAY/PAUSE twice, the player will begin playback at the first scene of the movie. 1.
DVD Functions DVD Setup Eject EQ Equalizer Type When this button is pressed, the disc is ejected. When this button is pressed for more than 3 seconds, the disc is unconditionally ejected. Use this function if you encounter difficultly ejecting a disc. In this menu you can choose the desired preset equalizer mode.
DVD Setup DVD Setup Video Setup Password Setup Picture Quality In the Video Setup, you can make adjustments to various elements of the picture quality. Video Setup Page Component Quality Divx VOD 1. Password Mode Password Setup, which is required for using the Parental Controls settings, is divided into two modules: Turning on the Password function, and setting a Password. The first step is to turn it on in the Password Mode setting.
DVD Setup DVD Setup 5. Disc Menu Use the Disc Menu option to select the display language for a DVD s disc menu display language. (not the same as the players menu) 1. Press the SETUP button during stop mode. 2. Press the / buttons to move to Preference. 3. Press the / buttons to move to Disc Menu. 4. Press the ENTER button. 5. Press the / buttons to select Disc Menu.
DVD Setup DVD Setup Preference Saturation Select screen saturation level using the direction ENTER button. / buttons and press the Choose the proper TV format appropriate to the monitor you have connected to the player from the following: NTSC, PAL or Multi type. Video Quality Setup Color Brightness Contrast Gamma Hue Saturation Luma Delay MID 00 00 None 00 00 1T Saturation Saturation 0 Saturation Select the Luma Delay menu and select the preferred video image quality.
