PT-120CM 12.
CONTENTS , Please read this User s Manual in detail and use the set properly.
CAUTION , Please read and observe all warnings and instructions in this owner s manual and those marked on the unit. Retain this booklet for future reference. There are two kinds of alarm symbols as follows: The lightening flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the, presence of dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to WARNING people.
SPECIFICATIONS CAUTION CAUTION DC 12V Power Consumption 9W Screen Size 1 2 . 1 T F T- L C D Screen Format 4:3 Resolution Pixel 2400x600 A/V Inputs 2 A/V RCA Inputs Dimensions(With shroud) 15.1(L)X13.9(W)X3.5(H)inches Dimensions(Without shroud) IR Power Requirements 14.8(L)X13.6(W)X2.5(H)inches DC 12V IR Power Consumption 3W IR Transmitter Frequency Right 2.8MHz LCD Panel Type Active Matrix TFT Compatible video standard N T S C / PA L A u t o S e l e c t Left 2.
INSTALLATION HOW TO OPERATE THE MONITOR Releasing the Monitor 1. Open the package and check that these items are presents. Push the open button (located on the front edge of the screen housing) a n d l o w e r t h e m o n i t o r t o t h e d e s i r e d a n g l e . Yo u c a n a l s o a d j u s t t h e swivel angle. UNIT INSTALLATION PLATE SCREW A SCREW B Make this arrow in DOWN direction only. 2. Connect the external compoments to the RCA cable or AV output.
NAME AND FUNCTION OF EACH PART CONNECTIONS Unit Red AUDIO(R) White AUDIO(L) Dome light Red AUDIO(R) White AUDIO(L) DVD/VCD/CD/CD-R/CD-RW/MP3 DVD/VCD/CD/CD-R/CD-RW/MP3 Reset PLAY/PAUSE PREV NEXT STOP DVD REMOTE AV EJECT POWER A/V INPUT Reset PLAY/PAUSE PREV NEXT STOP DVD REMOTE AV EJECT POWER A/V INPUT Yellow VIDEO Yellow VIDEO M E EXIT Chassis Ground ACC AV Input (AV 2) BLACK AV POWER MENU AV Input (AV 1) RED Door Trigger WHITE Infrared Transmitter Monitor (Front)
NAME AND FUNCTION OF EACH PART OSD MENU EXIT Button MENU Button PICTURE CONTROL POWER Button Contrast/Brightness/Color To adjust CONTRAST, BRIGHTNESS, COLOR press the MENU button until you arrive at the screen for that item. Use the arrow buttons to adjust the value. Press the MENU button to make another adjustment or leave the MENU system. M E EXIT AV MENU POW ER 1. Bring up the on-screen function menu by pressing the MENU button on the unit or the remote control. 2.
