4/8/16 por t 4/8/16 PORT AUTO KVM SWITCH POWER COMMUNICATION TECH.CO.,LTD. Address:9F-3,No716,Chung Cheng Rd.,Chung HoCity,Taipei,Taiwan Tel:886-02-8227-3297 Fax:886-02-8227-3363/8227-3765 http://www.pct-max.com.tw E-mail:sales@pct-max.com.
I.FUNCTION Content I.FUNCTION……………………………………………………………………………………………2 II.OPERATION………………………………….……………………………………………………..2 1.Front Panel Push Buttons……………………….............................................................2 2.Hot-key Commands…………………………..…………………………………………………….2 3.Using numerical key to select PC…………………………………………………………………3 4.Press key to activate the AUTO SCAN function………………………………………….3 5. key SELECT PC function…………………………………………………………………..4 6. key SEARCH PC function………………………………………………………………….
Table(1) C. When on MAIN MENU screen, the OSD display is shown as Figure(1): D. Line one shows PC:3+7 which indicates that the currently in use PC is connected to the port 7 of SLAVE and this SLAVE is cascaded to the MASTER port 3. E. Under this screen mode, user can press button, , , , , for activating its function and can also press number key (0-9) to select PC. F.
E. If cursor☞ selects the PC which is remarked with “⊕ò” means that the PC is daisychained to the SLAVE. Hit or <→> to enter into the cascaded SLAVE. OSD shows the selected daisy-chained PC information (see Figure(5)). On the right side of Line 1 of Figure(5) shows “SLAVER:??” to identity the on screen information is from?? Port of SALVER.
Ｐ Ｃ：２ ＰＯＲＴ ＮＡＭＥ ＥＤＩＴ Ｓ ＴＵ ─────── ─────────────── ─ １ ＰＣ１－１１１１ ２ ３ ＳＬＡＶＥＲ－３ ４ ＰＣ４－４ ５ ＰＣ５－５５５５ ６ ＰＣ６ ７ ＳＬＡＶＥＲ－７ ８ ＰＣ８ + +８ ＰＣ：３＋７ ＭＯＲＥ ＳＹＳＴＥＭ ─────────────────────── ＰＯＷＥＲ ＯＮ ＳＣＡＮ ＯＦＦ Ｓ Ｃ Ａ Ｎ Ｔ Ｉ ＭＥ ５ ＳＥＣ ＨＯＴ－ＫＥＹ ＳＣＲＯＬＬ ＢＵＺＺＥＲ ＯＮ Ｂ Ａ Ｃ Ｋ Ｇ Ｒ Ｏ Ｕ Ｎ ＤＣ Ｏ Ｌ Ｏ Ｒ ＯＮ + +８ ↓ ↑ ＦＯＲ ＳＥＬＥＣＴ ? ? ＦＯＲ ＳＥＴ ＰＲＥＳＳ ＥＳＣ ＴＯ ＭＡＩＮ ＭＥＮＵ Ｐ ＲＥＳＳ ＥＳＣ ＴＯ ＭＡＩＮ ＭＥＮＵ Figure (12) Figure(10) ＰＣ：２ ＳＬＡＶＥＲ： ３ ＰＯＲＴ ＮＡＭＥ ＥＤＩＴ ＳＴＵ ─────────────────────── １ Ｓ ３ －Ｐ Ｃ １ １ １ ２ Ｓ３－ＰＣ２２２ ３ ＥＭＡＩＬ－１ ４ ＳＭＰＴ－３ ５ Ｓ３－ＰＣ
B . Under MAIN MENU mode: hit key for password editing and if the MASTER password function has been already set, the OSD will ask for entering the password of MASTER (as Figure(13)). Only when the password is entered correctly will the user be allowed to use this device, OSD Shown as Figure(14). Figure(14) ＰＣ：２ ＥＤＩＴ ＵＮＩＴ ＯＲ ＰＯＲＴ ─────────────────────── １ ＥＤＩＴ ＵＮＩＴ ＰＳＷ． ２ B. When user enter the wrong password, the OSD will show message “ ERROR” (Shown as Figure(17)).
B. After selecting the choice 1, the screen will enter into MAIN OSD POSITION, please refer to Figure(20).By then, the user can adjust MAIN OSD POSITION by hitting <↓>/<↑>/<←>/<→> key. ＰＣ：２ ＭＡＩＮ ＯＳＤ ＰＯＳＩＴＩＯＮ ─────────────────────── UP Figure(20) IV.SPECIFICATION Function SPECIFICATION MU41X *Model (USB) *Case design 19* Rack *PC selection method Push Button / Keyboard Hot Keys/ OSD HD-15M × 4 *PC side connector *Console side connector LEFT TO MOVE RIGHT HD-15M × 8 *Dimension(L × W × H .
Cascade (Master/Slave) Configuration You can connect a second level of one or more Auto Multi-PCs Controller to “PC1~PC6” or “PC1~PC8” ports of a Master unit. Cascade configuration expands system ability allowing you to select computers connected to the Master or Slaves. There is only one Master, which has a mouse, a keyboard and a monitor connected to its CONSOLE port directly operated by a user. Once connected, automatically configure themselves to otherMaster or Slave.
