User's Manual

15
 Flight mode : Choose this item , then you can not call , send
messages .
 Display
 Wallpaper: Select standby interface wallpaper.
 Screen saver: Choose a screen saver picture for main standby
interface and set waiting time.
 Show data and time: Choose to open or close the time it shows on
the screen when the cellphone is open.
 Screen auto lock: Choose the time frame of locking the screen .
 Network settings
This menu has connection with the network supplier, so please get in
touch with them when you use this function. If you want to get into one
network which doesn’t have the roaming protocol with the original
network you have been in.
 SIM1 /SIM2 network settings:
 Network selection: Press the Left soft key to choose done or
press the Hung_Up key to exit the submenu.
 GPRS transfer pref: Press UP/Down Key and Left soft Key to select
Data prefer or Call Prefer.
 Security settings
 SIM1 security /SIM2 security:
 PIN lock:
You can set security options in this menu to avoid illegal operation of
the mobile phone or SIM card.
 PIN code: PIN code can prevent you SIM card from illegal
 Phone Security:
The phone lock can prevent your mobile phone from illegal operation.
Select phone lock to enable the protection, then, you need to enter
the password when you switch on the phone; press again to disable
phone lock.
Note: The default phone lock password is 1122. Please change into
your own private password as soon as possible.
 Privacy Protection: Open the privacy Protection, when you
access to corresponding function, you need to enter the password.
 Restore settings
The default password of Restore factory settings is 1122.
All data will be deleted when your phone is restored to its factory settings.
 Notification Settings
You can set the applications of Messaging and Downloads.
 Services
Enter this menu , here are some submenus as follows :Internet service ,
STK, Data accounts.
 Charge Pal
If you remain this function on , this phone can be used as a charge pal to
charge another phone.
 USB mode
While your phone is connected by USB, you may use your phone as storage
device and Modem .
Mass storage : You can use your computer to access and manage files on
your phone.
PC suite/COM port : You can connect your phone to your computer to
charge the battery
 When your phone is connected by USB but there is no further setting,
the phone will switch into charging mode.
 Appendix
 FAQ
The phone cannot be turned on
When the battery is very low, the phone may not be turned on properly.
Please charge the battery.
Cannot make certain calls
Check if Call Barring is set. If it is set, you may not be able to make calls or
only certain calls are allowed.
My call is picked up by another phone
Check if call divert is set. If it is set, your incoming calls may be diverted to
other numbers or devices.