User's Manual

8
 Battery level indicator
When the phone is on, the battery level indicator is located at the upper
right corner of the screen.
 Connecting to the Network
 SIM card
Please insert available Subscriber Identity Module (SIM) card into your
phone before using it. SIM card is supplied by your network carrier.
All the information related to network connection is recorded on the SIM
card, so is the contact information such as names, phone numbers and SMS
that you set to store on the SIM. You can take out the SIM card from the
phone and insert it into another GSM phone to use it. Most new phones will
recognize the SIM card automatically.
Do not touch the golden contacts of the SIM card; place it away from
electricity and magnetism to avoid damage. You will not be able to use the
phone if the SIM card is damaged.
Note:
 Before inserting and taking out the SIM card, always make sure that
the phone is switched off and disconnected from any external power
source; otherwise both the phone and the SIM card may be damaged.
 Installing and uninstalling the SIM card
The SIM card usually comes attached to a special card. The metal contacts
of SIM card can be easily damaged by scratching, so take it out carefully
before assembling it into the phone.
Switch off the phone, remove the back cover, battery and other external
power source. Fit the SIM card into the SIM card slot. Align the angled
corner of the SIM card with the slot. Slide in the SIM card, make sure it is in
place, install the battery, and restore the back cover.
Likewise, to remove the SIM card, switch off the phone, remove the battery
and then take out the SIM card.
 Unlocking the SIM card
PIN code
Your Personal Identification Number (PIN) code protects the SIM card
against unauthorized use. Your PIN code is usually supplied with the SIM
card. If this security function is enabled, you need to enter the PIN code
every time you turn on the phone. You can also disable this function.
To unlock the SIM card, press and hold the power button to turn on the
phone. Enter the PIN code. After three consecutive incorrect PIN code
entries, the code is blocked, and you need the PUK code to unblock it.
PUK code
This code is required to unblock a locked PIN code. If the code is not
supplied with the SIM card, contact your service provider. After ten
consecutive incorrect PUK code entries, the SIM card will become invalid.
Please contact your service provider to buy a new SIM card. The PUK code
cannot be edited. If it is lost, please contact your service provider.
 Connecting to the network
After the SIM card is unlocked, your phone will automatically search for the
registered network or other available local network. Once connected, the
name of the network carrier will appear on the top of the screen.
Your phone is now in Standby mode, ready for making and receiving calls.
 Standby screen and Icons
This phone provides a Standby screen. Through the instruction and various
icons on the screen, you can have the operating information needed.