4 INCH Quad Cycle Chipper Shredder PK0903 POWERKING Manual Read through this owner’s manual carefully before using product, to insure the safety of yourself and others. Due to continuing improvements, actual product may differ slightly from the product described herein.
Contents Ⅰ．Safety instructions-------------------------------------4 Ⅱ．Technical parameter-----------------------------------4 Ⅲ．Structural character-----------------------------------5 Ⅳ．Working process----------------------------------------6 Ⅴ．Operating instructions and warnings---------------6 Ⅵ．Maintenance instructions-----------------------------7 Ⅶ．Installation instructions--------------------------------7 Ⅷ．Transport and storage----------------------------------8 Ⅸ．Attachment------------------------
Preface Read through this owner’s manual carefully before using machine. Protect yourself and others by observing all safely information, warnings and cautions. The operating instructions involved safety instruction, structural feature, main technical parameters, working process, using instructions, maintenance,transport and storage, trouble shooting for users reference during the use of the machine.
Ⅰ. Safety instructions 1.The machine must not be used in any other way than described in the manual. 2.Use only original equipment and spare parts. If you use non-approved spare parts, there is increased risk and this is, therefore, not permissible. All liability is renounced in the event of an accident or other damage caused by the use of non-approved parts. 3.Before using the machine for the first time, read and follow this manual. 4.
13. Safety labeling and significance Read the instructions carefully before operating. DANGER, pay attention to safety. Keep hands away from the rolling parts. Beware of cutting the fingers. Keep a safe distance from the working machine. Beware of objects thrown out of the machines. Ⅱ. Technical parameter 1. Model: PK0903 Max. Chipping Capacity: 4 INCHES DIA Chipping Fineness: Granulated Detrital Function: Chipping leaves, branches, crop straw and farming feed, etc. Max.
Ⅲ. Structural character This series of high efficient machine has safe protection，firm structure, steady operation. Fuselage are all made of high quality steel, blades are made of high speed steel HSS, sharp cutting edge have good toughness, hardness, impact resistance and anti-abrasive. The machine are consist of frame1, feed hopper9, outlet hopper 10, wheel2, support frame 4 (details please find in attachment). The crush room, transmission device and power device are fixed in fuselage1. Ⅳ.
Take some protective measures before starting the machine. It is necessary to have an empty running test to make sure linking parts are firm enough, and check the amount of oil and fuel before operation. Turn on the motor to have an empty running test. (Detail information please find in the motor manual instruction.) After testing, it can be had a test with load from slight to heavy. Do not operate machine with overload, the raw material put the feeding hopper should be too big .
infuse the grease after using 50 hours because the lack of grease can easily cause bearing damage. Check all the parts regularly with 1-2 times monthly including bearing, blades, belt etc. Make sure they are flexible and sharp. Replace the blades as soon as the chipping performance begins to deteriorate. The blades are needed to check regularly. The blunt blades will lower working efficiency and cause the damage of machine.
Serial Number description 1 2 frame wheel 3 4 5 6 7 axle stand support joint tow bar knob frame pipe Installation procedure: first, lay the frame 1 on a elongated support or platform that is about 30cm high from the ground, and leave some space at the sides of the frame for the installing of the wheel2 and support frame 4, as it is showed in the pic, fix wheel2 with suitable fasteners to axle stand3, then fix the finished structure to frame1.
In the process of installation, do not place hands or any other body parts within a radius of cutter wheel rotary. Do not touch the blades with your hands or any other body parts. Considering the heavy weight of the machine, pls do not try to install it by oneself in case of the possible injury.
Pic2.
In the process of installation, do not place hands or any other body parts within a radius of cutter wheel rotary. Do not touch the blades with your hands or any other body parts. Regarding the heavy weight of the machine, pls do not try to install it by oneself in case of the possible injury. Pic3.
Place the toolkit on corresponding bracket position, connecting one end of the bundling belt to the retaining ring on the fuselage1,while the other end to the anchor point on the connecting pipe, then bundle the toolkit to fix it on the frame bracket. In the process of installation, do not place hands or any other body parts within a radius of cutter wheel rotary. Do not touch the blades with your hands or any other body parts.
Ⅹ. Troubleshooting The common faults Elimination method Read the engine users’ manual, check the fuel ON-OFF, see if it’s ON, check if gets enough fuel and lubrication oil, check the emergency stop button. Check if the engine is stopped by overloading, check if something blocked in the chipping hopper, check the emergency stop button and protection switch.
