Instructions / Assembly

ManualsBrandsPower King ManualsChipper Shredders4 in. 14 HP Gas Powered Chipper Shredder with Removable Tow Hitch Bar



Serial

Number

12 3 4 5 6 7

description frame wheel axle stand support

frame

joint

pipe

tow bar knob

Installation procedure: first, lay the frame 1 on a elongated support or platform

that is about 30cm high from the ground, and leave some space at the sides of

the frame for the installing of the wheel2 and support frame 4, as it is showed in the

pic, fix wheel2 with suitable fasteners to axle stand3, then fix the finished structure

to frame1. Install joint pipe5 to the corresponding position on the frame, and

then connect and fix support frame 4 and joint pipe5 ,and mount tow bar6 and

knob7.After the installation is complete, the elongated support or platform can be

removed and step into next phase.

Summary of content (5 pages)

PAGE 1
Serial Number description 1 2 frame wheel 3 4 5 6 7 axle stand support joint tow bar knob frame pipe Installation procedure: first, lay the frame 1 on a elongated support or platform that is about 30cm high from the ground, and leave some space at the sides of the frame for the installing of the wheel2 and support frame 4, as it is showed in the pic, fix wheel2 with suitable fasteners to axle stand3, then fix the finished structure to frame1.
PAGE 2
In the process of installation, do not place hands or any other body parts within a radius of cutter wheel rotary. Do not touch the blades with your hands or any other body parts. Considering the heavy weight of the machine, pls do not try to install it by oneself in case of the possible injury.
PAGE 3
Pic2.
PAGE 4
In the process of installation, do not place hands or any other body parts within a radius of cutter wheel rotary. Do not touch the blades with your hands or any other body parts. Regarding the heavy weight of the machine, pls do not try to install it by oneself in case of the possible injury. Pic3. Installation of Storage Battery and the Toolkit (3.
PAGE 5
Place the toolkit on corresponding bracket position, connecting one end of the bundling belt to the retaining ring on the fuselage1,while the other end to the anchor point on the connecting pipe, then bundle the toolkit to fix it on the frame bracket. In the process of installation, do not place hands or any other body parts within a radius of cutter wheel rotary. Do not touch the blades with your hands or any other body parts.