3 INCH Quad Cycle Chipper Shredder PK0913 POWERKING Manual Read through this owner’s manual carefully before using product, to insure the safety of yourself and others. Due to continuing improvements, actual product may differ slightly from the product described herein.
Contents Ⅰ.Safety instructions-------------------------------------3 Ⅱ.Technical parameter-----------------------------------4 Ⅲ.Structural character-----------------------------------5 Ⅳ.Working process----------------------------------------5 Ⅴ.Operating instructions and warnings---------------5 Ⅵ.Maintenance instructions-----------------------------6 Ⅶ.Installation instructions--------------------------------7 Ⅷ.Transport and storage----------------------------------7 Ⅸ.Attachment------------------------
Preface Read through this owner’s manual carefully before using machine. Protect yourself and others by observing all safely information, warnings and cautions. The operating instructions involved safety instruction, structural feature, main technical parameters, working process, using instructions, maintenance,transport and storage, trouble shooting for users reference during the use of the machine.
Ⅰ. Safety instructions 1.The machine must not be used in any other way than described in the manual. 2.Use only original equipment and spare parts. If you use non-approved spare parts, there is increased risk and this is, therefore, not permissible. All liability is renounced in the event of an accident or other damage caused by the use of non-approved parts. 3.Before using the machine for the first time, the dealer or other experienced mechanic must instruct in its use. 4.
13. Safety labeling and significance Read the instructions carefully before operating. DANGER, pay attention to safety. Keep hands away from the rolling parts. Beware of cutting the fingers. Keep a safe distance from the working machine. Beware of objects thrown out of the machines. WARNING: This product can expose you to chemicals including benzene,carbon monoxide, and lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Ⅲ. Structural character This series of high efficient machine has safe protection,firm structure, steady operation. Fuselage are all made of high quality steel, blades are made of high speed steel HSS, sharp cutting edge have good toughness, hardness, impact resistance and anti-abrasive. The machine are consist of frame1, feed hopper9, outlet hopper 10, wheel2, support frame 4 (details please find in attachment). The crush room, transmission device and power device are fixed in fuselage1. Ⅳ.
Take some protective measures before starting the machine. It is necessary to have an empty running test to make sure linking parts are firm enough, and check the amount of oil and fuel before operation. Turn on the motor to have an empty running test. (Detail information please find in the motor manual instruction.) After testing, it can be had a test with load from slight to heavy. Do not operate machine with overload, the raw material put the feeding hopper should be too big .
lubricating oil. After a period of using, it is necessary to infuse the grease. How ofter to infuse grease is determined by using environment and it’s frequency. You must infuse the grease after using 50 hours because the lackness of grease can be easily caused bearing damage. Check all the parts regularly with 1-2 times monthly including bearing, blades, belt etc. Make sure them are flexible and sharp. Replace the blades as soon as the chipping performance begins to deteriorate.
Ⅸ. Attachment Pic1.Frame installation Serial Number description 1 2 frame wheel 3 4 5 6 7 axle stand support joint tow bar knob frame pipe Installation procedure: first, pls lay the frame 1 on a elongated support or platform that is about 30cm high from the ground, and leave some space at the sides of the frame for the installing of the wheel2 and support frame 4, as it is showed in the pic, pls fix wheel2 with suitable fasteners to axle stand3, then fix the finished structure to frame1.
In the process of installation, do not place hands or any other body parts within a radius of cutter wheel rotary. Do not touch the blades with your hands or any other body parts. Considering the heavy weight of the machine, pls do not try to install it by oneself in case of the possible injury.
Pic2. Feed Hopper and Out let Hopper Installation Serial No. description 9 10 11 feed lower part of Upper part of hopper outlet hopper outlet hopper 12 knob 1.Connect the hinger of lower part of outlet hopper10 to the one on the frame with screw nut, then put the upper part11 on the lower part10 with bolts and knob12. 2.Connect the hinger of feed hopper9 to the one on the frame with screw nut.
In the process of installation, do not place hands or any other body parts within a radius of cutter wheel rotary. Do not touch the blades with your hands or any other body parts. Considering the heavy weight of the machine, pls do not try to install it by oneself in case of the possible injury.
Ⅹ. Troubleshooting The common faults Elimination method Read the engine users’ manual, check the fuel ON-OFF, see if it’s ON, check if gets enough fuel and lubrication oil, check the emergency stop button. Check if the engine is stopped by overloading, check if something blocked in the chipping hopper, check the emergency stop button and protection switch.
WARRANTY POLICY Thank you for choosing QVTOOLS Products. We're here to ensure that your experience is perfect. In some rare instances, you may need some help with a warranty claim please call us at 1-800-344-3371. Engine Warranty Kohler engines are covered with a 3 year commercial warranty for command pro series. Parts and Labor are covered. Power King engines by Lifan are covered with a 1 year residential warranty.