Instructions / Assembly

Part III: Operating the Trencher

PART III: Operating the Trencher

It may be helpful to better familiarize yourself with the features of your Trencher before

beginning the steps outlined in this chapter.

CAUTION

A. Read and understand all instructions, safety precautions, and/or warnings listed

in “PART I: General Safety Rules” before operating the TRENCHER. If any doubt or

question arises about the correct or safe method of performing anything found in

this manual, please contact the dealers in your area.

B. Before loading and operating the Trencher, always wear protective gear,

including safety goggles, hearing protection, tight-fitting gloves without draw

strings or loose cuffs, and steel-toed shoes.

Assembling

Step 1: Assembling the handle system

PAGE 1
Part III: Operating the Trencher PART III: Operating the Trencher It may be helpful to better familiarize yourself with the features of your Trencher before beginning the steps outlined in this chapter. CAUTION A. B. Read and understand all instructions, safety precautions, and/or warnings listed in “PART I: General Safety Rules” before operating the TRENCHER.
PAGE 2
Part III: Operating the Trencher Ref.No. Description 1 4 main frame 39 shift handle and spring 41 M8 bolt 47 48 upper handle Ref.No. 49 53 67 68 69 cotter pin Description lower handle angle arm M8*45 hexagon bolt M8*20 hexagon bolt Coil fixation M16 bolt a. Secure lower handle(49) to the main frame(1) tightly. b. Assemble upper handle(47) to the lower handle(49), secure them with bolt(48) and angle arm(53) tightly. c.
PAGE 3
Part III: Operating the Trencher a. Plug chain adapter(13) to the chain axle(2); b. Hold the chain(6) around chain adapter(13) and axle(2), then secure two head of the chain with chain pin(4) and chain lock(3); c. Secure bolt(55) until the chain is tight enough; d. Assemble chain cover(14) to the fixation(70) and secure with bolt(67) tightly. Starting Be sure the depth control is in the “0” depth position and move both stop switches to the “ON” position.