User Manual

Installation and Operator's Manual
(PVI-DESKTOP-yy-xx Rev: 1.2)
6.6 STATUS LED
At the top right of the display there is a LED status indicator. This LED will take on
different colours depending on the operating status of the PVI-DESKTOP. Figure 2
identifies the position of the LED. The following table is an aid to distinguishing the
different states of operation, the corresponding colours and the corresponding
operating states of the PVI-DESKTOP.
LED COLOUR INDICATION
LED off - No power connected (DC or USB)
Steady green LED
on
- Battery charged, at least one power supply connected (DC or
USB), device on standby
Steady orange
LED on
- Battery charging
Red LED flashing - Battery flat
Blue LED
flashing
- Aurora Desk on standby
6.7 BLUETOOTH
®
(OPTIONAL)
There is the possibility of having a Bluetooth
®
module as an optional interface for the
PVI-DESKTOP. This interface allows communication with PCs equipped with
Bluetooth
®
and dedicated software. It carries out all the functions implemented on the
USB port for data exchange and firmware upgrades.
Under normal operating conditions, the Bluetooth
®
function is disabled to eliminate
unnecessary power consumption. To enable this function you need to access the
appropriate menu.
NOTE: We recommend using Bluetooth® only when necessary and
disabling it immediately after use so as not to drain the battery quickly.