User Manual

Installation and Operator's Manual
(PVI-DESKTOP-yy-xx Rev: 1.2)
8 FIRMWARE UPGRADING
8.1 FW Upgrading procedure using Aurora Communicatore and USB
connection
1. Download the latest version of the Aurora Communicator Software. The
latest release of the SW is available at the following link: http://www.power-
one.it/digilab/Digi.aspx?Code=15
2. Click on Donwload to save the correct version of the SW with respect to the
OS version (32 or 64bit).
3. Unzip the file and launch the setup.exe to start installation.
4. In case a previous version of the Aurora Communicator is present on the PC,
it’s strongly recommended to uninstall it before to launch the installation of
the downloaded version.
5. During the FW upgrading make sure all the other programs are shut-off.
6. To complete this operation it’s mandatory to have an active USB connection
with the PVI-DESKTOP and an active connection to internet to make
possible the connection to the Power-One’s server for the FW downloading
7. Launch the Aurora Communicator SW From the Configuration menu, choose
Aurora PVI-DESKTOP Update.