MSDS

Revised: May 30, 2015
Supersedes: April 1, 2015
POWER SERVICE DIESEL KLEEN +CETANE BOOST
Page 5 of 12
SECTION 6 - ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT, AND EMERGENCY
PROCEDURES: Avoid contact with spilled material. Warn or evacuate occupants in
surrounding and downwind areas. Eliminate all sources of ignition in the vicinity of the spill or
released vapor. See Section 2 for Hazards Identification. See Section 4 for First Aid Measures.
See Section 5 for Fire Fighting Information. See Section 8 for Personal Protective Equipment.
SPILL CONTAINMENT AND CLEAN-UP: Eliminate potential sources of ignition. Stop leak if it
can be done without risk. Dike and contain spill. Do not touch or walk through spilled material.
Prevent entry into waterways, sewer, basements or confined areas. Remove with vacuum
trucks or pump to storage/salvage vessels. Soak up residue with an absorbent such as clay,
sand or other suitable material and dispose of properly. A vapor suppressing foam may be used
to reduce vapors. Local, state and federal laws and/or regulations may apply to releases and
disposal of this material, as well as those materials and items employed in the clean-up
releases. The user/responder will need to determine which local, state and federal laws and/or
regulations are applicable. The National Response Center can be reached at 1-800-424-8802.
SECTION 7 - HANDLING AND STORAGE
PRECAUTIONS FOR SAFE HANDLING: Avoid contact with eyes and skin. Use only with
adequate ventilation. Use proper bonding and/or grounding procedures. Prevent small spills and
leakage to avoid slip hazard. Material can accumulate static charges which may cause an
electrical spark (ignition source). Keep away from ignition sources such as heat, sparks, and
flames. No smoking.
CONDITIONS FOR SAFE STORAGE: DO NOT USE OR STORE near heat, sparks, or flame.
USE AND STORE ONLY IN A WELL-VENTILATED AND COOL AREA. Handle containers with
care. Keep container tightly closed when not in use. Store locked up.
STORAGE TEMPERATURE:
Treatment Ratio
Part Numbers:
Storage
Temperature:
1:400 Treatment Ratio
3016-06, 3016-09, 3025-12, 3080-06,
13016-06, 13016-09, 13025-12, 13041-
04, 13080-06
0F - 104F
(-18C - 40C)
1:1,000 Treatment Ratio
3128-04
0F - 104F
(-18C - 40C)
1:1,500 Treatment Ratio
3880-06, 3850-02, 3855-01, 3860-01,
3800
0F - 104F
(-18C - 40C)
EMPTY CONTAINER WARNING: EMPTY CONTAINERS MAY CONTAIN COMBUSTIBLE
VAPORS AND CAN BE DANGEROUS. SEE SECTION 5 FOR FIRE AND EXPLOSION
HAZARD DATA.