SDS

ManualsBrandsPower Service ManualsTools & Hardware16 fl. oz. Diesel Fuel Supplement with Cetane Boost

Revised: September 28, 2015

Supersedes: May 30, 2015

POWER SERVICE DIESEL FUEL SUPPLEMENT +CETANE BOOST

Page 1 of 13

POWER SERVICE PRODUCTS, INC.

SAFETY DATA SHEET

SECTION 1 - IDENTIFICATION

PRODUCT NAME: DIESEL FUEL SUPPLEMENT +CETANE BOOST

Unless otherwise noted, all sections of this SDS apply to each of the following products and part

numbers.

PART NUMBERS:

1:400 Treatment Ratio

1016-06, 1016-09, 1025-06, 1025-09, 1025-12,

1080-06, 11016-06, 11016-09, 11025-06,

11025-12, 11080-06

1:1,000 Treatment Ratio

1000, 1128-04, 1060-01

1:1,500 Treatment Ratio

1050-02, 1055-01, 1260-01

COMPANY IDENTIFICATION:

Power Service Products, Inc.

P.O. Box 1089

Weatherford, TX 76086

Email: psp@powerservice.com

Phone: 800-643-9089 or 817-599-9486

Fax: 817-599-4893

Emergency Phone Number: Within USA 1-800-424-9300. Outside USA 001-703-527-3887

(Call Collect).

RECOMMENDED USES: Diesel fuel additive

SECTION 2 – HAZARD(S) IDENTIFICATION

CLASSIFICATION UNDER 29 CFR 1910.1200(d)

(NC=product does not meet classification criteria)

1:400

Treatment

Ratio

1:1000

Treatment

Ratio

1:1500

Treatment

Ratio

Health Hazard Criteria

Summary of content (13 pages)

PAGE 1
POWER SERVICE PRODUCTS, INC. SAFETY DATA SHEET SECTION 1 - IDENTIFICATION PRODUCT NAME: DIESEL FUEL SUPPLEMENT +CETANE BOOST Unless otherwise noted, all sections of this SDS apply to each of the following products and part numbers.
PAGE 2
Health Hazard Criteria Skin Corrosion/Irritation: Serious Eye Damage/Eye Irritation: Respiratory Sensitization: Skin Sensitization: Germ Cell Mutagenicity: Carcinogenicity: Reproductive Toxicity: Specific Target Organ Toxicity, Single Exposure: Specific Target Organ Toxicity, Repeated or Prolonged Exposure: Aspiration Hazard: Physical Properties Criteria Explosives: Flammable Gases: Flammable Aerosols: Oxidizing Gases: Gases Under Pressure: Flammable Liquids: Flammable Solids: Self-Reactive Chemicals: Pyro
PAGE 3
Signal Word 1:400 Treatment Ratio Danger 1:1000 Treatment Ratio Danger 1:1500 Treatment Ratio Danger Hazard Statement(s): Flammable liquid and vapor. Toxic if inhaled. May be fatal if swallowed and enters airways. Harmful if swallowed. Causes skin and serious eye irritation. May cause respiratory irritation and drowsiness or dizziness. Symbols: The following symbols are for all treatment ratios. Precautionary Statement(s): Keep away from sparks and open flames. No smoking.
PAGE 4
TREATMENT RATIO 1:1000 Chemical Name Petroleum Distillates Alkyl Nitrates Aromatic Hydrocarbons Hexan-1-ol, 2-ethyl Naphthalene Common Name/Synonyms Trade secret Trade secret Trade secret Trade secret Not available CAS Number Trade secret Trade secret Trade secret Trade secret 91-20-3 Concentration (%) 40 - 90 5 - 15 2-5 1-4 0.1 – 0.
PAGE 5
EQUIPMENT OR ANY OTHER FLAME OR OTHER SOURCES OF IGNITION ON ANY EMPTY CONTAINER. PROTECTIVE EQUIPMENT AND PRECAUTIONS: Use standard protective equipment including self-contained breathing apparatus (SCBA). SECTION 6 - ACCIDENTAL RELEASE MEASURES PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT, AND EMERGENCY PROCEDURES: Avoid contact with spilled material. Warn or evacuate occupants in surrounding and downwind areas. Eliminate all sources of ignition in the vicinity of the spill or released vapor.
PAGE 6
1:1,500 Treatment 1050-02, 1055-01, 1260-01 Ratio 10F to 104F (-12C to 40C) EMPTY CONTAINER WARNING: EMPTY CONTAINERS MAY CONTAIN COMBUSTIBLE VAPORS AND CAN BE DANGEROUS. SEE SECTION 5 FOR FIRE AND EXPLOSION HAZARD DATA. SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION EXPOSURE GUIDELINES: CAS # OSHA PEL ACGIH TLV STEL REL NIOSH STEL IDLH Note Ethylbenzene 100-41-4 100 ppm 20 ppm not est. 100 ppm 125 ppm 800 ppm (LEL) n/a Naphthalene 91-20-3 10 ppm 10 ppm not est.
PAGE 7
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES Appearance Odor Odor Threshold pH Melting point/Freezing point Initial Boiling Point and Boiling Range Flash Point Evaporation Rate Flammability Upper / lower Flammability or Explosive Limits Vapor Pressure Vapor Density Relative Density/Specific Gravity (at 60°F) Solubility Partition Coefficient; n-octanol / water Auto-ignition Temperature Decomposition temperature Viscosity Pour Point 1:400 Treatment Ratio Liquid, brown Aromatic solvent Not available Not ava
PAGE 8
SECTION 11 - TOXICOLOGICAL INFORMATION LIKELY ROUTES OF EXPOSURE INGESTION INHALATION 1:400 Treatment Ratio 1:1000 Treatment Ratio 1:1500 Treatment Ratio X X X SKIN CONTACT X X X EYE CONTACT X X X SKIN ABSORPTION X X X SYMPTOMS RELATED TO PHYSICAL, CHEMICAL AND TOXICOLOGICAL CHARACTERISTICS: Breathing of high vapor concentrations may cause dizziness, lightheadedness, headache, nausea and loss of coordination. Continued inhalation may result in unconsciousness.
PAGE 9
Chemical Cumene Ethylbenzene Naphthalene List IARC, NTP IARC IARC, NTP REPODUCTIVE TOXICITY: No information available. TERATOGENICITY/EMBRYOTOXICITY: Hydroxy Alkoxylate has caused fetotoxicity with maternal toxicity. This product contains a component of a complex mixture (Xylenes (1330-207)) that has been shown to cause teratogenicity and/or embryotoxicity. SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE): Respiratory tract irritation, drowsiness/dizziness.
PAGE 10
HAZARD DATA. Dispose or recycle empty containers appropriately per local, state and federal regulations.
PAGE 11
SECTION 15 - REGULATORY INFORMATION §14(a) Consumer Product Safety Act General Certificate of Conformity Power Service Products, Inc. certifies that this product meets the statutory and regulatory requirements of the US Consumer Products Safety Act, the Federal Hazardous Substances Act, and the Poison Prevention Packaging Act of 1970, as applicable. The Power Service products are manufactured in the United States in Weatherford, Texas, unless otherwise indicated on the product label.
PAGE 12
Treatment Ratio 1:1000 Treatment Ratio 1:1,500 Treatment Ratio CAS Number Chemical Name 91-20-3 98-82-8 108-88-3 100-41-4 91-20-3 98-82-8 108-88-3 100-41-4 91-20-3 98-82-8 108-88-3 Naphthalene Cumene Toluene Ethylbenzene Naphthalene Cumene Toluene Ethylbenzene Naphthalene Cumene Toluene Max % 1.0 4.0 4.0 19.0 1.0 3.5 3.5 12.0 1.0 2.0 2.0 State or local laws may impose additional regulatory requirements for components of this material.
PAGE 13
industrial hygiene and safe handling procedures are believed to be valid in the context of the intended use as described in product labeling. However, each user should review these recommendations in the specific context of the intended use and determine whether they are appropriate. You are urged to obtain material safety data sheets for all products you buy, process, use or distribute, and are encouraged to advise those who may come in contact with such products of the information contained therein.