Brochure

Features
Absorbent Glass Mat (AGM) technology for superior
performance
Valve regulated, spill proof construction allows safe
operation in any position
Oversize negative plates and a specialized paste
formulation provide true deep cycle performance.
Special additives in the paste ensure superior
performance in deep discharge situations.
Power/volume ratio yielding unrivaled energy density
Rugged impact resistant ABS case and cover (UL94-HB)
Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and
C.A.B. certified
U.L. recognized under file number MH 20845
T11: Threaded insert
w. 8 mm stud fastener
20mm
M8
7mm
Performan
c
e
Spe
c
i
fi
c
a
t
ion
s
Nominal Voltage ........................................................................ 12 volts (6 cells)
Nominal Capacity
20-hr. (13.4A to 10.50 volts) ........................................................ 268.0 AH
10-hr. (25.0A to 10.50 volts) ........................................................ 250.0 AH
8-hr. (30.6A to 10.50 volts) ........................................................ 244.8 AH
5-hr. (66.3A to 10.20 volts) ........................................................ 219.5 AH
1-hr. (161.5A to 9.00 volts) ........................................................ 161.5 AH
Physical Dimensions: in (mm)
L: 20.55 (522) W: 10.55 (268) H: 8.66 (220) HT: 8.90 (226)
Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for
height dimensions. All data subject to change without notice.
Approximate Weight ......................................................... 160.9 lbs. (73.0 kg)
Energy Density (20-hr. rate) ................................ 1.71 W-h/in
3
(104.53 W-h/l)
Specific Energy (20-hr. rate) .............................. 19.99 W-h/lb (44.07 W-h/kg)
Internal Resistance (approx.) ..................................................... 2.5 milliohms
Max Discharge Current (7 Min.) ................................................ 804 amperes
Max Short-Duration Discharge Current (10 Sec.)................. 2680 amperes
Shelf Life (% of nominal capacity at 68°F (20°C))
1 Month ...................................................................................................... 97%
3 Months..................................................................................................... 91%
6 Months .................................................................................................... 83%
Operating Temperature Range
Charge.. ........................................................... -4°F (-20°C) to 122°F (50°C)
Discharge ....................................................... -40°F (-40°C) to 140°F (60°C)
Case ...................................................................................................... ABS Plastic
Power-Sonic Chargers ........................................................... PSC-1210000A-C
H
W
PDC-122500
12 Volt 268.0 AH @ 20-hr. rate
250.0 AH @ 10-hr. rate
Seal ed
Recha rgeable
AGM
Deep
Cycl e
Batter y
HT
PDC SERIES
®
Pb
MH2 084 5
NON SPIL LAB LE
Po wer - So nic C or po ra ti on
www.p ow er -s oni c. co m
L
T
o
ensure
safe
and
efficient
operation
always
refer
to
the
latest
edition
of
our T
echnical
Manual,
as
published
on
our website.
All
data
subject
to
change
without
notice.
www.sealedperformance.com.au
Terminals
(mm)
C

Summary of content (2 pages)