Brochure
Features
• Absorbent Glass Mat (AGM) technology for superior
performance
• Valve regulated, spill proof construction allows safe
operation in any position
• Oversize negative plates and a specialized paste
formulation provide true deep cycle performance.
• Special additives in the paste ensure superior
performance in deep discharge situations.
• Power/volume ratio yielding unrivaled energy density
• Rugged impact resistant ABS case and cover (UL94-HB)
• Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and
C.A.B. certified
• U.L. recognized under file number MH 20845
• T6: Threaded insert w.
6 mm stud fastener
16mm
M6
6mm
Performan
c
e
Spe
c
i
fi
c
a
t
ion
s
Nominal Voltage ........................................................................ 12 volts (6 cells)
Nominal Capacity
20-hr. (2.40A to 10.50 volts) .......................................................... 48.0 AH
10-hr. (4.5A to 10.50 volts) ............................................................ 45.0 AH
8-hr. (5.27A to 10.50 volts) .......................................................... 42.2 AH
5-hr. (7.74A to 10.20 volts) ........................................................... 38.7 AH
1-hr. (27.5A to 9.00 volts) .............................................................. 27.5 AH
Physical Dimensions: in (mm)
L: 7.76 (197) W: 6.50 (165) H: 6.69 (170) HT: 6.69 (170)
Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for
height dimensions. All data subject to change without notice.
15-min. (82.5A to 9.00 volts) .............................................................. 20.6 AH
Approximate Weight ........................................................... 32.0 lbs. (14.5 kg)
Energy Density (20-hr. rate) .................................. 1.60 W-h/in
3
(97.78 W-h/l)
Specific Energy (20-hr. rate) .............................. 16.88 W-h/lb (37.20 W-h/kg)
Internal Resistance (approx.) ..................................................... 9.0 milliohms
Max Discharge Current (7 Min.) ................................................ 135 amperes
Max Short-Duration Discharge Current (10 Sec.)................... 450 amperes
Shelf Life (% of nominal capacity at 68°F (20°C))
1 Month ...................................................................................................... 97%
3 Months..................................................................................................... 91%
6 Months .................................................................................................... 83%
Operating Temperature Range
Charge.. ........................................................... -4°F (-20°C) to 122°F (50°C)
Discharge ....................................................... -40°F (-40°C) to 140°F (60°C)
Case ...................................................................................................... ABS Plastic
Power-Sonic Chargers ............................................................. PSC-124000A-C
H
W
PDC-12480
12 Volt 48.0 AH @ 20-hr. rate
45.0 AH @ 10-hr. rate
Seal ed
Rec hargea ble
AGM
Deep
Cycl e
Batt ery
HT
PDC SERIES
®
Pb
PDC-12480
MH2 084 5
NON SPIL LAB LE
12
Volt
48.0
A.H.
Po we r- S on ic C orp o ra tio n
www.p o we r- so ni c. co m
L
T
o
ensure
safe
and
efficient
operation
always
refer
to
the
latest
edition
of
our T
echnical
Manual,
as
published
on
our website.
All
data
subject
to
change
without
notice.
www.sealedperformance.com.au
Terminals
(mm)
C