Cut Sheet

Project: ______________________________________________________________ Approval Stamp:
Architect / Engineer: ____________________________________________________
Date: _________________________ Phone: ________________________________
Contractor: ___________________________________________________________
Address: _____________________________________________________________
____________________________________________________________________
Notes 1: ______________________________________________________________
____________________________________________________________________
Notes 2: ______________________________________________________________
____________________________________________________________________
FITTINGS
■
MATERIAL:
All Power-Strut fittings are formed in punch press dies from mild,
pickled and oiled, bar or strip steel. Plain or electro-galvanized
fittings meet the requirements for ASTM A575 and A-576, or
ASTM A-36.
■
STANDARD DIMENSIONS:
Standard dimensions on all fittings are as follows except where
otherwise indicated:
Fitting Thickness: 1⁄4"
Fitting Width: 15⁄8"
Hole Diameter: 9⁄16"
Hole Spacing: 17⁄8" on centers and 13⁄16" from ends.
■
STANDARD FINISH:
All Power-Strut fittings are available in painted green or
electro-galvanized finish.
■
ORDERING INFORMATION:
When ordering, add the length or size and finish to the part
number.
PS 2064 – Double-Column Post Base
Weight/100 pcs: 311 lbs.
Use With: PS 100, PS 200 2T2, PS 200 2T3,
PS 200 2T4 and PS 200 2T5
3
1
⁄2"
7"
4"
2"
3
⁄4"
3
⁄4"