User manual

12
7. UPS feature
• Turn on the powergorilla by holding down the on/o button (4) for 3 seconds.
• Tap the on/o button (4) until the 19V setting is show on the LCD screen (5).
• Connect the universal AC mains charger (6) to the powergorilla and connect it to the electrical socket.
• If the power supply is interrupted, the powergorilla will stay permanently on when on the 19V setting.
8. Daisy chain feature
• When using the 19V AC mains charger (6) to charge the powergorilla, the DC out port (3) will be set at
19V. This will enable you to charge your laptop for example and powergorilla at the same time.
• While charging with the 19V AC mains charger (6), you are also able to charge USB devices
simultaneously.
9. Safety lock on feature
• When a device is connected and drawing enough power to be detected by the powergorilla, the LCD
screen (5) will ash 3 times. The voltage setting will be locked on to avoid accidental voltage change
when charging a device. To change the voltage when the safety lock on feature is enabled, hold down
the on/o button (4) for 3 seconds and scroll through.