User Manual

9
4. OPERATION
4.1 After installation with normal city power, the Converter will turn on automatically. Confirm
the output voltage and frequency from LCD display by pressing the up/down select button.
4.2 Converter OFF: Pushing the main control button for 3 seconds, the Inverter will turn off
the output voltage. The CPU will run “OFF(idle) mode when LCD shows ‘OFF’.
4.3 In idle mode, Converter will turn on again when the main control button is pushed for 1
second. Please pull out the power cord or disconnect the input power if you want to shut
down the converter completely.
4.4 Change the output voltage and frequency: To push the two selection buttons, △ and
▽, at the same time for 3 seconds until the LCD display begins to blink.