User Manual

13
6. SPECIFICATIONS
STEP-UP Voltage and Frequency Converter (
UX-URX series
)
1000VA/ 1500VA / 2000VA / 3000VA
UX-1K /UX-1.5K /UX-2K /UX-3K
Output
Capacity
1000VA/900W
1500VA/1350W 2000VA/1800W
3000VA/2700W
Output Voltage
200V/220V/230V/240V Selectable
Voltage Waveform
Sine wave
Crest Factor
3
1
Output Frequency
(sync to mains)
50/60Hz (selectable from LCD function button)
Output Frequency
(not sync to mains)
50±0.01Hz or 60±0.01Hz
Regulation
±2% of selected output voltage (adjustable by using the setting
software)
OUTPUT CURRENT
200 V ~ 240 V
4.2 Amp 6.3 Amp 8.4 Amp 12.5 Amp
OUTPUTPEAKCURRENT
(<250mS)
13 Amp 20 Amp 27Amp 37 Amp
Over load protection
100%~129% for 60 seconds, then audible alarm; audible alarm
sounds for 60 seconds before shutting down
>130%,alarm will go off for 2 seconds and then shutting down
Harmonic Distortion
<3% (at full resistive load)
Efficiency
Up to 90%
Input
Voltage Range
100V~285Vac
240 volts
Range: 180V~285V
Requires a dedicated
240-volt power
Frequency Range
45~70Hz
Input Current
10 Amp
15 Amp
20 Amp
20 Amp
Wall-Outlet Type Required
NEMA 5-15 R (15
Amps)
NEMA 5-20 R (20 Amps)
NEMA 5-20 R (20 Amps)
NEMA 6-20 R (20 Amps)
Power Factor
0.98
Surge Current
<100A, 3mS
Communications & Management
Control panel
LCD
Audible alarm
Overload alarm: Short-circuit alarm, Thermal alarm
Environmental and Safety
Operating Temp.
Up to 1500 meters: 0
to 40
(32
to 104
)