User's Manual

WiFi Disk simple Manual
6
2. USB3.0 Port：When connected to the computer, the USB 3.0 can transmit data
between the computer and the device, and can also charge the device battery.
1.4.2 Front Panel
Power LED
1. Green Steady Light: The battery power is >30%.
2. Red Steady Light: The battery power is <30% and >10%.
3. Red Fast Flash: The battery power is depleting and will soon shut down.
4. Green Slow Flash (every two seconds): The battery is charging.
5. Green Slow Flash (every one second): The device is shutting down.
6. LED off: The device is powered off.
WiFi LED
1. Blue LED shows the system initiation state. It starts flashing in the process of
initiation, and it stops flashing when the system initiation completes.
2. Blue Steady Light: WiFi is ready.
3. The LED light is off for the following situations:
A. Device is on, but the WiFi signal is unsteady.
B. Device is off.
C. Device is in Mobile HDD Mode and the WiFi is off.
Internet LED
1. WiFi connection
A. Blue Steady Light: WiFi signal is good.
B. Red Steady Light: WiFi signal is weak.
C. No Light: Not connected to the Internet.
2. Wired connection
A. Blue Steady Light: Internet connection is successful.
B. No light: Internet connection failed.
RW LED
1. On WiFi disk mode
A. White Steady Light: HDD connection is successful.
B. White Flashing Light: HDD is reading or writing.
2. Mobile HD mode
A. White Steady Light: Connected to USB2.0
B. White Flashing Light: Connected to USB2.0 and is reading or writing.
C. Blue Steady Light: Connect to USB3.0
D. Blue Flashing Light: Connected to USB3.0 and is reading or writing.
3. ON/OFF BUTTON: Turns the device on/off.
1.5 Product Description
WiFi-Storage accesses the data through WiFi.
◆ Storage medium supports any 2.5inch by 9mm SATA HDD.