User's Manual

Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v2.1
57
Configure DDNS steps:
Step 1: select enable DDNS option on this page。
Step 2：Select on DDNS server provide, and register an account if you do not use yet
Step 3：Input your dynamic DNS in test box of host name
Step 4：Enter your DDNS application service user name in the text box of user name
Step 5：Enter your DDNS application's password in the text box of password
Step 6: Click the "save" button
If the "Status" appear "Connection successful," the words said setting successful, as below. If appear
"Connection failure" said set failed, please check your domain, user name and password.
If device mode is Wired Access,we should set DMZ on routers directly ,but if device mode is
Wireless Access mode, we should not only set up the DDNS, but also set up the router port forwarding .
Assume that device’s IP is 192.168.1.254,we enter the router that connecting with device,and setting
up the router port forwarding in port forwarding interface. shown as follows: