User Manual

ManualsBrandsPowerA ManualsAccessoriesWireless Controller for Nintendo Switch – GameCube Style: Gold

ENGLISH

CONTENTS

• Wireless Controller for Nintendo Switch

• Battery Compartment Door

• (2) 1.5V AA Batteries

• User Manual

SET UP

Check for system update. Nintendo Switch™

system update version 6.0.1 or later is required for

use of PowerA Wireless controllers.

1. Connect your Nintendo Switch to the Internet

2. Typically, system updates will be downloaded

automatically when connected online.

3. Select ‘System Settings’ from HOME menu, then

scroll down to ‘System’ to see System Update

version and automatically check for system update.

For additional help, search ‘system update’ from

Nintendo Support website.

INSTALL BATTERIES

1. Remove the battery door, and install two AA

Alkaline Batteries

2. Conﬁrm your Nintendo Switch™ console is powered ON.

WIRELESS PAIRING

From the HOME Menu, select “Controllers,” then

“Change Grip and Order.” While the following

screen is displayed, press and hold down the SYNC

Button for at least three seconds on the Controller

you wish to pair.

NOTE: After controller is paired once, it will auto-

connect next time.

UNDERSTANDING LED INDICATORS

There are two LED locations on this controller: top

and front.

1. The top LED near the Sync button will ﬂash

Red when the Alkaline batteries are nearing

depletion. Replace Alkaline batteries once LED

is ﬂashing to avoid gameplay interruptions.

2. The four LEDs on the front indicate player

number 1-8 and will cycle from left to right

during wireless pairing.

TROUBLESHOOTING

Q1. My Wireless Controller is not pairing.

A1. Conﬁrm batteries are properly installed, and

are not drained, used or damaged.

A2. Conﬁrm you are following the pairing process.

A3. Remove and replace the Alkaline batteries to

reset the Wireless controller.

BATTERY LEAKAGE WARNING

Leakage of battery ﬂuid can cause personal injury as

well as damage to your controller. If battery leakage

occurs, thoroughly wash the affected skin and

clothes. Keep battery ﬂuid away from your eyes and

mouth. Leaking batteries may make popping sounds.

To avoid battery leakage:

• Do not mix used and new batteries (replace all bat-

teries at the same time).

• Do not mix different brands of batteries.

• Alkaline batteries recommended. Do not use Lithium

ion, nickel cadmium (nicad), or carbon zinc batteries.

• Do not leave batteries in the remote for long periods

of non-use.

• Do not recharge alkaline or non-rechargeable

batteries.

• Do not put the batteries in backwards. Make sure

that the positive (+) and negative (-) ends are

facing in the correct directions. Insert the negative

end ﬁrst.

• When removing batteries, remove the positive end

ﬁrst.

• Do not use damaged, deformed or leaking batteries.

• Remove exhausted batteries from the controller

• Rechargeable batteries must be removed from the

controller before being charged

• Rechargeable batteries should be charged under

adult supervision

• Do not short circuit the supply terminals

MOTION WARNING

Playing video games can make your muscles,

joints, skin or eyes hurt. Follow these instructions

to avoid problems such as tendinitis, carpal tunnel

syndrome, skin irritation or eyestrain:

• Avoid excessive play. Take a 10 to 15 minute

break every hour, even if you don’t think you

need it. Parents should monitor their children

for appropriate play.

• If your hands, wrists, arms or eyes become tired

or sore while playing, or if you feel symptoms

such as tingling, numbness, burning or stiff-

ness, stop and rest for several hours before

playing again.

• If you continue to have any of the above symp-

toms or other discomfort during or after play,

stop playing and see a doctor.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference,

and

2. this device must accept any interference

received, including interference that may cause

undesired operation.

WARNING: Changes or modiﬁcations to this unit

not expressly approved by the party responsible

for compliance could void the user’s authority to

operate the equipment.

NOTE: This equipment has been tested and found

to comply with the limits for Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment generates,

uses and can radiate radio frequency energy and,

if not installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try

to correct the interference by One or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/ TV

technician for help.

Customer Service

Service client

Kundendienst

Servicio a clientes

Assistenza clienti

Apoio ao Cliente

PowerA.com/Support

BDA, LLC.

15525 Woodinville-Redmond Rd NE

Woodinville, WA 98072

Two year limited warranty

For warranty details or support with your authentic PowerA accessories, please visit PowerA.com/Support.

Beschränkte 2-Jahre-Garantie Informationen zur Garantie oder Unterstützung zu Ihrem PowerA-Originalzubehör

nden Sie unter PowerA.com/Support.

Garantía limitada de dos años Si quieres más información sobre la garantía o necesitas ayuda con tus accesorios

originales de PowerA, visita PowerA.com/Support.

Garantie limitée de deux ans Pour plus de détails sur la garantie ou pour obtenir une assistance pour vos accessoires

PowerA d’origine, veuillez consulter le site PowerA.com/Support.

Garanzia limitata di due anni Per i dettagli sulla garanzia o per richiedere assistenza per i tuoi accessori PowerA

autentici, visita la pagina PowerA.com/Support.

Garantia limitada de dois anos Para mais informações sobre a garantia ou os acessórios originais da PowerA, visita

PowerA.com/Support.

WIRELESS

CONTROLLER

USER MANUAL

Manuel de l’utilisateur

Bedienungsanleitung

Manual de usuario

Manuale per l’uso

Manual do usuário

+Control Pad

Player LED

+ Button

Home Button

- Button

C-Stick

Left Stick A/B/X/Y Buttons

Capture Button

R L

ZR ZL

R Button L Button

ZR Button ZL Button

Low Battery LED Indicator Sync Button

GAMECUBE STYLE

Summary of content (4 pages)

PAGE 1
Customer Service Service client Kundendienst Servicio a clientes Assistenza clienti Apoio ao Cliente WIRELESS CONTROLLER BDA, LLC. 15525 Woodinville-Redmond Rd NE Woodinville, WA 98072 Two year limited warranty For warranty details or support with your authentic PowerA accessories, please visit PowerA.com/Support. GAMECUBE STYLE Beschränkte 2-Jahre-Garantie Informationen zur Garantie oder Unterstützung zu Ihrem PowerA-Originalzubehör finden Sie unter PowerA.com/Support.
PAGE 2
CAN ICES-3(B)/NMB-3(B) DECLARATION OF CONFORMITY This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions: Hereby, Bensussen Deutsch & Associates LLC at 15525 Woodinville-Redmond Road NE, Woodinville, WA 98072 USA, declares that this wireless controller is in compliance with Directive 2014/53/ EU.
PAGE 3
2. Comprueba que la consola Nintendo Switch esté encendida. SINCRONIZACIÓN INALÁMBRICA En el menú HOME, selecciona “Mandos”, luego “Cambiar agarre y orden”. Mientras se muestra la pantalla siguiente, mantén pulsado el botón SYNC durante un mínimo de un segundo en el mando que desees sincronizar. Una vez sincronizado el mando, la próxima vez se conectará automáticamente. QUÉ SIGNIFICAN LOS INDICADORES LED Hay dos indicadores LED en este mando: el superior y el frontal. 1.
PAGE 4
CONTROLLO DEGLI AGGIORNAMENTI DI SISTEMA Per l’utilizzo dei controller PowerA Wireless è richiesto l’aggiornamento del sistema Nintendo alla versione 6.0.1 o successiva. 1. Collega il tuo Nintendo Switch™ a Internet 2. In genere, gli aggiornamenti di sistema verranno scaricati automaticamente una volta connessi online. 3.