Specifications

Remote Gain Controller Connection

Your PowerBass Autosound Class D amp includes a wired Remote Gain control module terminated with a

mini phone plug. To connect the Remote Gain Control to the ampliﬁer, simply insert one the mini plug into the

REMOTE Gain jack. Install the module within easy reach on or under your dash.

0dB+18 dB

Fig.9 Control Module with Pre-wired Plug

Adjusting the BASS EQ and BASS FREQ Controls

The BASS EQ is adjustable from 0-18dB, thus allowing you to tailor your sound system to your particular tastes.

The BASS FREQ lets you choose the frequency that the BASS EQ will boost from 30Hz - 80Hz. You will want

to experiment with both controls—begin your adjustments at low volume. First turn the BASS EQ control about

half-way up. Next, vary the BASS FREQ control up and down. Adjust both controls until you ﬁnd the right

combination that sounds best with the music you listen to most.

NOTE: More is not always better. By turning the BASS EQ all the way up to 18dB you can overwork

the ampliﬁer and send the unit into thermal protection.

Fig.8a Bass EQ Control Fig.8b Bass FREQ Control

30Hz 80Hz