Specifications

CONTROL PANEL LAYOUT

1. POWER Indicator

The clear L.E.D. lights BLUE when the power is on.

2. STATUS Indicator

This L.E.D. turns RED when the built-in protection circuitry is activated. This indicates a problem with the

system in relation to the ampliﬁer (see Troubleshooting Tips).

3. REMOTE Gain

This is the connector port for the Remote Gain Control. Now the ampliﬁers secondary gain circuit can be

adjusted from the driver’s seat.

4. HIGH INPUT

Allows you to connect speaker output from factory radio to ampliﬁer without the use of a low level convertor.

Fig.2 Panel Layout