OE692-TY OE652-TY OE69C-TY OE65C-TY TOYOTA O.E.M. PLUG & PLAY Application Guide Please read through this manual to familiarize yourself with your new speakers. Should your PowerBass Autosound speaker components ever require service, you will need to have the original dated receipt.
Thank you and Congratulations Congratulations on your purchase of PowerBass Autosound speakers. You now own a speaker of uncompromising design and engineering from a factory that truly believes in the relentless pursuit of perfection. Incorporating the highest quality parts and state-of-the-art materials, these speakers display the ultimate balance between high fidelity, performance and long-lasting reliability. At PowerBass USA, Inc.
POWERBASS Toyota OEM Plug & Play FEATURES - Injection PP Cone - Nylon OEM Speaker Basket - 1” Silk Dome Tweeter on Coaxials, OE652-TY and OE692-TY - 3/4” Inverted Titanium Dome Tweeter on Components Kits, OE65C-TY and OE69C-TY - 20 oz.
SPECIFICATIONS (Due to Constant Improvements, Specifications and Parameters are subject to change without notice.) Model # Size Nominal Impedance Frequency Response Sensitivity 1W/1M Magnet Size Mounting Depth Power RMS/ Peak OE692-TY 6x9” 4-ohm 65Hz - 20kHz 89 dB 20 oz. 1.8” 80W/160W OE652-TY 6.5” 4-ohm 70Hz - 20kHz 88 dB 20 oz. 1.75” 60W/120W OE69C-TY 6x9” 4-ohm 65Hz - 20kHz 89 dB 20 oz. 1.8” 80W/160W OE65C-TY 6.5” 4-ohm 70Hz - 20kHz 88 dB 20 oz. 1.
INSTALLATION EXPERIENCE Installation of PowerBass Autosound Speakers requires experience with a variety of mechanical and electrical procedures. This manual only provides general installation and operation instructions. If you have any reservations about your installation skills or lack of the proper tools, please contact your local PowerBass Autosound dealer for assistance.
INSTALLATION PRECAUTIONS NOTE: Proceed only if you are a qualified installer otherwise; let your dealer do it.
6X9” SPEAKER INSTALL (OE692-TY, OE69C-TY) 1. After removing the door panel, unplug speaker plug from factory speaker. 2. To remove the factory speaker either drill out the 4 rivets or unscrew the 4 x 10mm bolts (do not discard these bolts you will need them to install your new speaker). 3. Remove factory speaker. .OW YOU RE READY TO INSTALL YOUR NEW SPEAKER 5. Fit speaker in place and make sure all mounting holes line up. Install with the 4 supplied rivets (see fig 5.
6.5” SPEAKER INSTALL (OE652-TY, OE65C-TY) 1. After removing the door panel, unplug speaker plug from factory speaker. 2. To remove the factory speaker either drill out the 3 rivets or unscrew the 3 x 10mm bolts (do not discard these bolts you will need them to install your new speaker) 2EMOVE FACTORY SPEAKER .OW YOU RE READY TO INSTALL your new speaker. 4. Fit speaker in place and make sure all mounting holes line up.
DASH TWEETER INSTALL (OE69C-TY, OE65C-TY) 1. Remove grill cover to gain access to the factory tweeter. 2. Remove the 2 x 10mm bolts unplug and remove factory tweeter (do not discard these bolts you will need them to install your new tweeters. 3. Now identify the speaker plug adapter you will need from the supplied parts (see fig 2 and fig 3, pg 4) plug the tweeter in the plug adapter then into the factory plug. 4.
DOOR TWEETER INSTALL (OE69C-TY, OE65C-TY) 1. Remove or un-clip tweeter cover/housing to gain access to the factory tweeter. 2. Unplug factory tweeter plug to remove tweeter housing. 3. Unclip factory tweeter from housing using a small pic tool. 4. Now install new tweeter by clipping it into the housing (some glue or modification may be necessary to install tweeter into factory location). 5.
LIST OF COMPATIBLE VEHICLES OE652-TY | OE65C-TY (Speakers may fit in newer make applications other than those listed below Please consult your Authorized PowerBass Dealer for more details or visit www.powerbassusa.com).
LIST OF COMPATIBLE VEHICLES OE692-TY | OE69C-TY (Speakers may fit in newer make applications other than those listed below Please consult your Authorized PowerBass Dealer for more details or visit www.powerbassusa.com).
POWERBASS AUTOSOUND LIMITED WARRANTY POLICY PowerBass USA, Inc. offers limited warranty on PowerBass products under normal use on the following terms: PowerBass Autosound Speakers are to be free of defects in material and workmanship for a period of one (1) year. This warranty applies only to PowerBass products sold to consumers by Authorized PowerBass Dealers in the United States of America.
PowerBass Autosound – A division of PowerBass USA, Inc. 3 'REEN 0RIVADO n /NTARIO #! Tel. (909) 923-3868 – Fax (909) 923-8048 www.powerbassusa.
