Owner's Manual

6.5" SPEAKER INSTALL (OE652-FD, OE65C-FD)
1 . After removing the door panel, unplug speaker plug
from factory speaker.
3. Remove factory speaker. Now you're ready to install
your new speaker.
5. Now plug the factory speaker p lu g into the new speaker.
If the factory plug is not long enough try to remove some of
the tape on the wire to extend it or use the supplied exten-
sion cable (see Fig 4, pg 4). Reinstall door panel.
9
2. To remove the factory speaker, unscrew the 3 x 7mm
bolts (do not discard these screws you will need them to
install your new speaker)
4. Fit speaker in place and make sure all mounting holes
line up. Install with the 3 x 7mm screws you removed from
the factory speaker.