OE692-GM OE652-GM OE69C-GM OE65C-GM GM O.E.M. PLUG & PLAY Application Guide Please read through this manual to familiarize yourself with your new speakers. Should your PowerBass Autosound speaker components ever require service, you will need to have the original dated receipt.
Thank you and Congratulations Congratulations on your purchase of PowerBass Autosound speakers. You now own a speaker of uncompromising design and engineering from a factory that truly believes in the relentless pursuit of perfection. Incorporating the highest quality parts and state-of-the-art materials, these speakers display the ultimate balance between high fidelity, performance and long-lasting reliability. At PowerBass USA, Inc.
POWERBASS GM OEM Plug & Play FEATURES - Injection PP Cone - Nylon OEM Speaker Basket - 1” Silk Dome Tweeter on Coaxials (OE652-GM, OE692-GM) - 1” Silk Dome Tweeter with Diffuser on Components Kit (OE65C-GM) - 2.75” High Bandwidth Driver on Component Kit (OE69C-GM) - 20 oz. Magnet (OE652-GM, OE65C-GM) 35 oz.
OE652-GM, OE65C-SPECIFICATIONS (Due to Constant Improvements, Specifications and Parameters are subject to change without notice.) Model # Size Nominal Impedance Frequency Response Sensitivity 1W/1M Magnet Size Mounting Depth Power RMS/ Peak OE652-GM 6.5” 4-ohm 70Hz - 20kHz 88 dB 20 oz. 1.6” 60W/120W OE65C-GM 6.5” 4-ohm 70Hz - 20kHz 88 dB 20 oz. 1.6 ” 60W/120W Before beginning your installation, thoroughly read this guide and keep it as a reference.
OE692-GM, OE69C-GM SPECIFICATIONS (Due to Constant Improvements, Specifications and Parameters are subject to change without notice.) Model # Size Nominal Impedance Frequency Response Sensitivity 1W/1M Magnet Size Mounting Depth Power RMS/ Peak OE692-GM 6x9” 4-ohm 65Hz - 20kHz 89 dB 35 oz. 1.85” 80W/160W OE69C-GM 6x9” 4-ohm 65Hz - 20kHz 89 dB 35 oz. 1.85” 80W/160W Before beginning your installation, thoroughly read this guide and keep it as a reference.
INSTALLATION EXPERIENCE Installation of PowerBass Autosound Speakers requires experience with a variety of mechanical and electrical procedures. This manual only provides general installation and operation instructions. If you have any reservations about your installation skills or lack of the proper tools, please contact your local PowerBass Autosound dealer for assistance.
6X9” SPEAKER INSTALL (OE692-GM, OE69C-GM) 1. Remove door panel to gain access to the factory speaker. Remove the 7mm bolt at the top of the speaker (do not discard this bolt as you will need it to install your new speaker. 2. Remove the factory speaker by unclipping it at the top and pulling it forward. Then carefully unplug the speaker and remove from vehicle. 3. Plug in you new speaker and clip in starting from the bottom first. Securely mount the new speaker using the 7mm bolt.
6.5” SPEAKER INSTALL (OE652-GM, OE65C-GM) 1. Remove door panel to gain access to the factory speaker. Remove the 7mm bolt at the top of the speaker (do not discard this bolt as you will need it to install your new speaker). 2. Remove the factory speaker by unclipping it at the top and pulling it forward. Then carefully unplug the speaker and remove the vehicle. 3. Plug in you new speaker and clip in starting from the bottom first. Securely mount the new speaker using the 7mm bolt.
COMPONENT TWEETER INSTALL (OE65C-GM) 1. Remove pillar or panel to gain access to the factory tweeter, unplug and remove tweeter from the vehicle. 2. Unclip or remove factory tweeter from pillar or panel. 3. Locate both the tweeter adapter ring and the correct tweeter plug, attach them to your new tweeter. 4. Install your new tweeter back into the pillar or panel. Plugin your new tweeter and reinstall pillar or panel into vehicle to complete installation.
HIGH BANDWIDTH DRIVER INSTALL (OE69C-GM) FRONT 1. Remove cover to gain access to the factory speaker. Remove the two 7mm screws securing the speaker. (Don’t discard these screws as you will need them to install your new speaker) carefully unplug and remove speaker. FRONT 2. Plug in and mount your new speaker with the screws you removed from the factory speaker. FRONT 3. Reinstall speaker cover. REAR 1. Remove panel to gain access to the factory speaker. Carefully unplug and remove panel and speaker.
LIST OF COMPATIBLE VEHICLES OE652-GM | OE65C-GM Speakers may fit in additional models other than those listed below To verify fitment for your specific year and model, please see our expanded fitment guide at www.powerbassusa.
LIST OF COMPATIBLE VEHICLES OE692-GM | OE69C-GM Speakers may fit in additional models other than those listed below To verify fitment for your specific year and model, please see our expanded fitment guide at www.powerbassusa.
POWERBASS AUTOSOUND LIMITED WARRANTY POLICY PowerBass USA, Inc. offers limited warranty on PowerBass products under normal use on the following terms: PowerBass Autosound Speakers are to be free of defects in material and workmanship for a period of one (1) year. This warranty applies only to PowerBass products sold to consumers by Authorized PowerBass Dealers in the United States of America.
PowerBass Autosound – A division of PowerBass USA, Inc. 2133 S. Green Privado – Ontario, CA 91761 Tel. (909) 923-3868 – Fax (909) 923-8048 www.powerbassusa.
