Owner's Manual

1. Remove door panel to gain access to the factory
speaker. Remove the 7mm bolt at the top of the speaker
(do not discard this bolt as you will need it to install your
new speaker).
3. Plug in you new speaker and clip in starting from the
bottom first. Securely mount the new speaker using the
7mm bolt. There are two extra mouting holes at the bot-
tom of the speaker that will require drilling new holes to
use. These are optional mounting holes
2. Remove the factory speaker by unclipping it at the top
and pulling it forward. Then carefully unplug the speaker
and remove the vehicle.
4. Reinstall door panel to complete installation.
6.5” SPEAKER INSTALL (OE652-GM, OE65C-GM)
9