Owner's Manual

Remote Level Controller
Your PowerBass PS-AWB enclosure includes a wired Remote Level Subwoofer control module. It uses
standard telephone wire and telephone RJ45 connectors. To connect the Remote Subwoofer Gain control
to the amplified enclosure, simply insert one end of the telephone plug into the REMOTE gain port. Plug
the other end into the back of the remote module. Mount the module within easy reach or under your dash.
(Fig 10)
NOTE: DO NOT plug in or disconnect the remote bass level controller when the amplifier is on!
Break In Period
To get the most from your woofer we recommend a "break-in" period of at least 40 hours (typically 2 weeks)
at no more than 1/3 of maximum volume.
During this time the cone and spider assembly will gradually break in resulting in greater performance and
more listening enjoyment.
Fig.10 Connection with RJ45 Jack
Product Disposal – Certain international, national and/or local
laws and/or regulations may apply regarding the disposal of this prod-
uct. For further detailed information, please contact the retailer where
you purchased this product or the PowerBass Importer/Distributor in
your country.
16