Owner's Manual

POWERBASS AMPLIFIED BASS SYSTEM fEATURES
BUILT-IN HIGH POWERED AMPLIFIER: Contains a high power Class D monaural amplifier complete
with chassis mounted adjustable Gain, Low Pass Filter and Bass Eq controls for sonic integration
into most existing factory or aftermarket car stereo systems and engineered perfectly to power the
subwoofer.
SELECTABLE SENSITIVITY SETTING: With this button pressed in, the preamp sensitivity will accept
input voltages from 2V-1 OV. This will be used if High Level Inputs are connected to your amplified
enclosure. With this button left out, the preamp sensitivity will now accept 250mV-6V. This will be used if
Low Level / RCA Inputs are connected to your amplified enclosure.
DIE-CAST ALUMINUM ENCLOSURE DESIGN: This enclosure is constructed from aircraft grade
aluminum that has been acoustically tuned with the integrated custom tooled passive radiator for
optimum bass output.
REMOTE SUBWOOFER LEVEL CONTROL: This wired remote functions as a Bass Level control and can
provide 0-12dB of gain at 45Hz. The remote will not increase the output beyond the GAIN setting on the
amplifier. Supplied with cable to reach your dash even when the bass enclosure is mounted under the
seat.
ALUMINUM-COATED POLYPROPYLENE CONE: A thermoplastic polymer cone was selected to
help resist moisture and other elements while the rubber surround offers more excursion as well as
protection against deterioration than other materials.
KSV HIGH TEMPERATURE VOICE COIL: These specially designed resin coated high temperature
Kapton® voice coils measure 1 112 inches in diameter to ensure high power handling and precise
linear excursion while maximizing thermal heat dissipation.
AUTO TURN-ON CIRCUIT: When using the high level inputs, the amplifier will turn on automatically
when it senses a signal from your radio.
Kapton® is a registered trademark of E./ . du Pont de Nemours and Company
3