Owner's Manual

12
BLUETOOTH PAIRING AND OPERATION
1) Turn sound bar on by holding power button for 3-5 seconds, there will be an audible beep to confirm the
soundbar is on.
2) Press the Bluetooth button momentarily and you will hear an audible sequence of tones to confirm
soundbar is now ready to pair with your device along with flashing back lights.
3) Go into the Bluetooth settings of your device and search for the XL-1200 signal to pair. Once paired, there
will be an audible beep to confirm that the soundbar and your Bluetooth device has paired successfully.
4) Once the pairing process is complete, use either the main controller on the soundbar or connected device
to control volume up and down, track back or forward, and pause/mute.
5) If using optional external controller (XL-SBCON) the same functions apply. The connection of a external
controller does not bypass the main controller both can be used as well as your connected device.
Auto-Turn Off Circuit
When finished using the soundbar, manually power off the unit by pressing and holding the Power Button
for 3-5 seconds, there will be an audible beep to confirm that the unit is off. To prevent battery drain, the
soundbar is equipped with an Auto-Turn off Circuit. After 10 minutes of non-activity this circuit will turn off
the soundbar automatically. To resume play back after the Auto-Turn off circuit has been engaged, simply
press the Power Button.