Application Guide

13
BLUETOOTH PAIRING AND OPERATION
1) Turn sound bar on by holding power button for 3-5 seconds, there will be an audible beep to confirm the
soundbar is on.
2) Press the Bluetooth button momentarily and you will hear an audible sequence of tones to confirm
soundbar is now ready to pair with your device along with flashing back lights.
3) Go into the Bluetooth settings of your device and search for the XL-(model) Soundbar signal to pair. Once
paired, there will be an audible beep to confirm that the soundbar and your Bluetooth device has paired
successfully.
4) Once the pairing process is complete, use either the main controller on the soundbar or connected device
to control volume up and down, track back or forward, and pause/mute.
WIRELESS REMOTE PAIRING OPERATION
(SOLD SEPERATELY)
Pairing your (Sold Separately) XL-SBCONRF wireless remote control can be achieved by following these
simple steps.
1) Power up your XL Series Soundbar.
2) Push and hold – Track Forward – until the lights begin to blink.
3) Push any button on the XL-SBCONRF
4) Soundbar light will blink fast, then solid to confirm pairing is successful.