Application Guide

TROUBLESHOOTING TIPS

(Due to continuing improvements these speciﬁcations are subject to change without any notice. Do not attempt

to ﬁx or repair this unit. Unauthorized repairs will void the manufacturer’s warranty..)

PROBLEM SOLUTION

NO POWER

With a volt meter (VOM) check

• Red & Blue wire should read +12 to +16 VDC

• Black wire should read -12 to -16VDC

NO SOUND

Check input device

• Make sure your device is paired with the sound bar

• Make sure you are connected to the AUX input cable

DISTORTED OUTPUT

Check input signal

• Make sure your input signal does not exceed 3 volts

• Reduce the volume on either the soundbar or connected device

SOUND CUTS ON/OFF

Check input signal

• Make sure your input signal is at least 250mV

• Raise the volume on either the soundbar or connected device

NOT ABLE TO PAIR

BLUETOOTH DEVICE

Check

• Make sure no other device is paired (only one device can be paired

at a time)

• Make sure Bluetooth is turned on from your device

Product Disposal – Certain international, national and/or local laws and/

or regulations may apply regarding the disposal of this product. For further

detailed information, please contact the retailer where you purchased this

product or the PowerBass Importer/Distributor in your country.

This manual is the exclusive property of PowerBass USA, Inc. Any reproduction of this manual, or use other than its intentions is