Application Guide

MOUNTING LOCATION
Find an unobstructed location that where the soundbar will be easily heard and out of the way so no harm will
come to any individual in or around the vehicle. A prime location to mount the soundbar in an off-road vehicle
would be on the roll bar preferably in the front of the cockpit.
POWER WIRING AND SIGNAL CONNECTIONS
Red Fuse Wire is the main power lead to be connected directly to the positive terminal of the
12V battery. It is recommended to hook this power wire directly to the battery for better current and
voltage flow (fig. 4).
Black Ground Wire (fig. 3 & 4) is the ground lead to the soundbar and needs to be a solid ground connec-
tion. Sand or scrape the paint away from a solid chassis location and use a screw or bolt with a star washer
for best results. It is recommended to connect the Ground Wire directly to the Battery negative
(fig. 4).
Blue Accessory Wire is the power on and off switch for your soundbar. Attach this
lead your ignition or any 12 volt switched power.
Blue & White Remote Out Wire is to power on and off external amplifiers for use
along with your soundbar.
AUX RCA Input is the audio input from a source unit that produces 250mV to 3 volts.
AUX RCA Output is up to a 2 volt output to drive an external amp (subwoofer or full-range) or a second
sound bar. This output is a full-range variable output that is controlled by the soundbar pre-amp.
Fig.3 Power Wiring and
Signal Connections