User manual Powerbox Voltage regulator Linear 5.3V

PowerBox-Systems − World Leaders in RC Power Supply Systems
lt is also feasible to use LiPo batteries with our PowerBox
12 switch backer (without integral voltage regulation) if
you connect one voltage regulator to the system for each
battery.
The regulator can supply 2 to 3 Ampere - according to bat-
tery type and cooling efciency - which is adequate for mo-
dels tted with 6-8 standard servos or 4-5 digital servos.
Since any voltage regulating device generates waste heat
(varying according to current drain and input voltage), the
regulator should always be installed in an open position in
the modal, i.e. not enclosed.
The regulater is completely encapsulated using the modern
„hot melt“ process; this renders it totally impervious to vi-
bration and moisture of all kinds.
Specication
Voltage range: 4.0-9.0 Volt
Regulated voltage: Pre-set 5.3 or 5.9 Volt, according to
Order Number
Performance: Regulated 2.0 - 3.0 A, according to
cooling measures and input voltage
Max. performance: Peak (brief) 10 A
Regulator losses: 0.14 Volt
Temperature range: -30°C to +75°
Weight: 12.5 grammes