User manual Powerbox Voltage regulator Linear 5.3V
www.powerbox-systems.com 5
EMV tested: EN 55014 - 1 and EN 55014 - 2
CE tested: 2004/108/EG, certicated dated 1O.03.2009
Approved only for use with a two-cell LiPo/LiIon or LiFe
battery or a ve-cell NiMh battery. The device must not be
used in conjunction with a mains PSU!
Entire electronic
circuit encapsulated
using a „hot melt“
process: resistant
to water and acid,
vibration-protected,
fracture proof JR
connector contacts
Heavy duty
cable (0.34 mm
2
conductors) used
for connection to
receiver or con-
sumer unit Gold-pla-
ted JR connector
contacts
High-capacity
capacitor to
absorb servo
feedback
currents
Large-area
heat-sink for
efcient heat
dissipation
contact plugs for connecting the power source: centre
contact is positive, do not plug out of phase!
Connecting lead
with robust kink
guard and strain relief, encapsu-
lated using „hot melt“ injecti-
on-moulding technology