User manual PowerBox Jet Smokepump

2 PowerBox-Systems − World Leaders in RC Power Supply Systems
Dear Customer,
We are delighted that you have selected the PowerBox Smokepump from our ran-
ge of products.
1. PRODUCT DESCRIPTION
The PowerBox Smokepump has been developed by PowerBox-Systems speci-
cally for pumping smoke oil in model aircraft. The mechanical system and elec-
tronics are manufactured on our own premises, and the unit‘s high standard of
quality is evident from its long effective life: the PowerBox Smokepump is the wor-
ld‘s most durable smoke oil pump, as has been demonstrated in several long-term
tests.
The mechanical pump system is assembled entirely from high-quality aluminium
and brass parts. All our pumps are subjected to a running-in procedure during
manufacture, ensuring that the gears mesh perfectly, and that the pump is 100%
leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off
valve with the PowerBox Smokepump.
The electronic circuit is innitely variable within the range 0% - 100%, allowing the
pilot to ne-tune the ow rate to match the exact requirements of the model. The
Smokepump can be powered either by a PowerBox or a separate battery.
If a separate battery is used, the electronic circuit switches to a „stand-by“ mode if
the receiver fails to pick up a signal. This means that it is not necessary to provide
a separate switch to isolate the PowerBox Smokepump from the battery when you
switch the model off.
The PowerBox Smokepump is available in a Standard version and a Jet version,
the later with higher throughput and twin outlets.