User manual PowerBus Leads 1.5mm 90cm

www.powerbox-systems.com 13
5. PIN ASSIGNMENT
One great advantage of the PowerBUS is that it employs standard commercial
MPX connectors. We supply PowerBUS leads in standard lengths, but can also
make them up to the lengths you need. Please note that some installations present
problems, with the result that the connectors can only be attached once the lead
has been installed.
The following photos show the correct pin assignments:
Caution: PowerBUS adapters are protected from reverse polarity, but if you
plug servos into an incorrectly wired PowerBUS, they will instantly be ruined!
For this reason it is essential to observe correct polarity, and compare your
soldered connectors with the photos shown above!
PowerBUS socket PowerBUS plug
3x GND
2x PWR
1x SIGNAL