User manual PowerBus Leads 1.5mm 90cm

www.powerbox-systems.com 3
shorted out at a servo distributor, within a few micro-seconds that output is swit-
ched off, and the bus lead remains active.
This supplementary feature is very important to ight safety, since a servo bus
without it can never be suitable for use in valuable model aircraft!
The following section introduces and describes the individual components of the
PowerBUS:
1. OVERVIEW OF POWERBUS COMPONENTS
Three different types of distributor are available:
Order No. 9200 - PowerBUS to PWM Adapter
Quadruple distributor with integral BUS/PWM con-
verter
Order No. 9210 - PowerBUS to BUS Adapter
Quadruple distributor for bus-enabled servos
Order No. 9220 - PowerBUS Splitter
Splitter, for converting one PowerBUS lead into
two