User manual PowerBus Leads 1.5mm 90cm

www.powerbox-systems.com 7
3. THE POWERBUS - BASIC INFORMATION
The PowerBUS can carry 16 channels + 2 switched channels. lt is possible to as-
sign any functions you wish to the bus, thanks to the unrestricted channel assign-
ment facilities of the Champion SRS and Royal SRS. This is important: for examp-
le, if you wish to assign the aileron signal - as it comes from the transmitter - to the
PowerBUS, and also wish to include the gyro gain and servo match settings. The
door sequencer function can also be assigned to the PowerBUS.
a) Procedure for setting up the PowerBox
Requirement for subsequent steps:
The type of radio control system must be entered correctly at the PowerBox.
lf you are using a gyro (with the Royal SRS), you must rst complete the iGyro As-
sistant procedure to complete the channel assignment on the input side.
The rst step in assigning particular outputs to the bus is to assign the function in
the Output Mapping menu of the PowerBox: