User manual PowerBus Leads 1.5mm 90cm
8 PowerBox-Systems − World Leaders in RC Power Supply Systems
You will nd this standard display in the OUTPUT MAPPING menu of the Royal
SRS. Functions can only be assigned to the PowerBUS if they have already been
dened under OUTPUT MAPPING.
These instructions include an example which shows the step-by-step procedure for
assigning the bus; it also shows how to use the ServoMatch function in conjunction
with the PowerBUS.
The function of output G is GYRO AILERON A, and the function of output H is also
GYRO AILERON A. At rst sight the function of both outputs is the same. However,
these two functions are to be assigned to an aileron actuated by two servos. The
ServoMatch function is used for ne-tuning, to ensure that the travel of both servos
is identical.
Note: in the case of the Champion SRS it is only possible to select the DIRECT 1 -
16 and DS1 - 6 outputs instead of the gyro channels.
Once the function assignment process is complete, move the cursor to the left
to P-BUS and conrm your choice by pressing the SET button. You will see this
display: