User Manual

PowerBox-Systems − World Leaders in RC Power Supply Systems

Back to our Wing screen: when all the assignments are complete, press the button, amongst the quick-select buttons at the

bottom in order to return to the overview. You can now continue assigning transmitter controls and servos to all the remaining

assigning transmitter controls and servos to all the remaining functions. When everything is ﬁnished, touch Continue at bottom

right. The functions and servo assignments are complete.

3.3 Function Menu

You now arrive at the most important screen display: The

Function overview. In principle, the set-up of the whole mo-

del is carried out from this starting point. The display is arranged

logically from left to right:

Function > Control > Trim > Setup > Failsafe > Servo(s)

The individual points in detail:

3.3.1. Function

Each function always contains a transmitter control, the associated trim, the settings for the transmitter control – such as Expo

and Travel, Failsafe or Hold – and the assigned servos. Each function can also be renamed just as you wish at this screen: simply

touch the Function name.

3.3.2. Control

Here you can assign a transmitter control or a ﬁxed value to the

function. The transmitter control can be a stick, a slider, a rotary

control, a switch or a button.

3.3.3. Trim

• Flight Mode

Here you can select whether the effect of any trim adjustment

is to be Global – i.e., the trim value should be the same in all

ﬂight modes – or Single – i.e., the trim value should be variable

separately in each ﬂight mode. The method of using ﬂight

modes is discussed later.

• Trim Control

It is necessary to assign a trim control as the ﬁrst step here.

This can be one of the four trims located adjacent to the pri-

mary sticks, or two of the four rubberized push-buttons. If you

select the push-buttons, the buttons always work together left

and right as the trim.